Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter

Reader Reviews

Add your own review

Evernew Ti stove and cross stand

in Stoves - Alcohol

Average Rating
5.00 / 5 (1 reviews)


Display Avatars Sort By:
Dave Jenkins
( Jinx667 )

Locale:
SoCal
Evernew Ti stove and Ti cross stand on 06/18/2011 14:40:42 MDT Report Post Print

Rating: 5 / 5

Decided to switch to an alcohol stove for a upcoming trip and picked up the Evernew. It was a bit hard to find in stock, but a little google fu got one to my door. It weighs 1.2 0z with an additional 0.5 oz for the pot stand. The pot stand sits securely in the stove and is very stable for my SP 700 mug.

Photobucket

Look at that flame!

Photobucket


Initial testing in my kitchen, with 30ml denatured alcohol and no pot stand yielded a boil time of around 6:30 and a total burn time of 11:30. It primed in less than 30sec and I was able to start it with a fire steel on the first strike.

Photobucket


Once I added the cross stand and filled the stove to the max line (2.3oz). I found it burned much hotter, with a boil time of around 5:30 min, but burned out in 18:45. So, I will need to do some more testing with equivalent amounts of alcohol.

Another burn test yielded a burn time of 34min with 60ml of fuel and the pot sitting directly on top of the stove, as per the first test. Boil time was closer to 7 minutes and I stopped time when the water stopped boiling.

Photobucket

Overall I am very happy with it so far, and the Ti gets a very nice coloring after a few burns.

The only con is the cost, but Ti has gotten more expensive over the last few years.

Edited by Jinx667 on 06/26/2011 02:39:12 MDT.

Add your own review