Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter

Liquid Fuel Stoves Head to Head: MSR SimmerLite vs. Coleman Xtreme

Performance comparison of two lightweight liquid fuel backpacking stoves.

Print Jump to Reader Comments

by Roger Caffin | 2005-02-08 03:00:00-07

Editor's note: This feature article, by subscriber Roger Caffin, offers one perspective that considers the performance comparison between two liquid fuel stoves: the MSR Simmerlite and the Coleman Xtreme. The conclusions, comments, and opinions derived in this article belong solely to the author, and have not been endorsed or verified by or the Product Review Program or its staff.

Translation key from Australian English to American English:
petrol = white gas
gas = butane/iso-butane/propane mixes, i.e. canisters


MSR SimmerLite vs Coleman Xtreme - 1
The Coleman Xtreme and MSR SimmerLite, packed, with fuel containers.

The Coleman Xtreme and the MSR SimmerLite do look rather similar, especially when packaged up in the bags provided. They weigh almost exactly the same when equipped with 'full tanks' of fuel. However, underneath they are quite different.

MSR SimmerLite

MSR SimmerLite vs Coleman Xtreme - 2
MSR SimmerLite

The MSR SimmerLite is an updated version of the classic WhisperLite. The burner weighs 181 grams (6.4 oz) with all three legs and hose installed. The pump weighs 64 grams (2.3 oz), a slight increase from the old version's 49 grams (1.7 oz). The smallest MSR fuel tank (11 fluid ounce volume) weighs 69 grams (2.4 oz) without a cap; the cap weighs an additional 10 grams (0.4 oz) but can be left at home so is not counted. With the tank filled to the recommended level, total weight is 290 grams (10.2 oz), or 221 grams (7.8 oz) of petrol. A 12-gram (0.4 oz) tool kit with multi-purpose spanner, mineral oil for lubricating the washer on the pump, and a spare O-ring for the tank-to-hose coupling is included. The total weight of all components and a full fuel bottle is about 547 grams (19.3 oz). Additional items that many users will choose to leave behind are a 21-gram (0.7 oz) stuff sack and a multilingual instruction manual.

MSR claims that this stove's "shaker jet" technology makes cleaning easy. The shaker jet is a heavy object inside the jet which, when the stove is shaken, pokes a wire through the jet to clean out any muck which lodges there. I think this feature implicitly acknowledges that these stoves do get blocked jets. For more serious troubleshooting, the whole stove disassembles with the spanner for field service. The manual's instructions on this procedure are good, but I recommend a practice run at home before taking it to the mountains. I would strongly recommend that disassembly be done over a large cloth or hat to catch all the bits and keep them clean.

The stove hose is a little short, but well reinforced. The coupling into the tank is long and well secured with a spring clip. If you use a windscreen around the stove, which is recommended, the hose length will not be a problem.

Coleman Xtreme

MSR SimmerLite vs Coleman Xtreme - 3
Coleman Xtreme

This is the stove that I use for all my winter ski touring trips. It looks quite similar to the SimmerLite, except for the rather large and heavy gas regulating valve assembly on the end of the hose. The burner weighs 314 grams (11.1 oz). There is no pump. The smallest fuel tank weighs 68 grams (2.4 oz) and holds 170 grams (6.0 oz) of gas, for a total of 238 grams (8.4 oz) for a full fuel bottle. (I consider this amount of gas to be comparable to the 221 grams (7.8 oz) of petrol that the small MSR fuel bottle contains.) The total weight of a full fuel bottle and all components is therefore about 552 grams (19.5 oz), as compared to 547 grams (19.3 oz) for the SimmerLite. It too comes with a little nylon bag (31 grams, 1.1 oz).

No tools or service information were supplied with the stove, although a maintenance kit is available and recommended. The hose is slightly longer than the hose on the SimmerLite.

Initial Impressions

MSR SimmerLite

I must say this stove does have a 'clean' appearance, and the burner itself is quite light compared with some of the older models. There is a thin generator tube running around the edge of the burner. From my experience with petrol stoves, I have to say the length of this tube looks like a massive overkill: some petrol stoves have far shorter generator tubes. However, I think the reason for the length is to allow the petrol to be vaporised even when the stove is running at a very low flame. The effectiveness of this is discussed below.

The pump that came with the stove is a newer model than on my other MSR stoves. There have been some small engineering refinements, but the basics are still the same. It should be possible to swap the pumps around between stoves. The manual gives adequate instructions on filling, pumping, and checking for leaks, with an emphasis on safety. The stove includes a flexible windshield, a stove base of the same material, and a nice little kit of spare parts. The windshield is the standard MSR heavy aluminum foil style that is normally wrapped around the fuel tank when traveling. I found its height to be inadequate. The foldable stove base is not durable and is too soft to provide any real additional stability to the stove. Its only useful purposes are to catch spilled fuel or to insulate a surface from the heat of the burner.

Coleman Xtreme

My first impression of this stove was that the valve assembly was rather large: but then, you don't want the gas connection falling off, do you? The first bit of the hose that protrudes from the burner is rigid: use care to avoid damaging the junction between the hose and burner. The hose is thin compared to the SimmerLite hose and the generator tube is smaller. The stove does not include a windscreen or stove base.

The gas tank is similar in size to a small MSR fuel bottle. People sometimes complain about the weight of the empty gas tanks: at 68 grams (2.4 oz) I am not sure what they are moaning about. A small 'can opener' is provided with the stove. This is designed to allow you to puncture the tank after you have emptied it, to allow it to dry in the sun. The empty tank can then be recycled with soft drink cans. Finally, every gas cartridge is supplied with a plastic clip-on lid to protect the outlet valve from dirt or debris. Strangely, Coleman does not provide a cover for the open end of the valve assembly.


MSR SimmerLite

Assembly of the MSR SimmerLite is easy. Fill the fuel tank, insert the pump, and give it the recommended twenty strokes. Then, lubricate the end of the hose before inserting it into the connector in the pump. The manual recommends using spit or oil, which seemed a little primitive. Instead, I used a very small amount of silicone O-ring grease that I'd gotten from another stove spare parts kit. Finally, extend the stove's three folded legs.

Coleman Xtreme

Assembling the Xtreme is extremely simple. Extend the legs, then push the end of the gas cartridge into the valve unit and give it a small clockwise turn. It clicks into place. It took me a couple of tries to get the feel for it, but after that it was easy.

Firing Up

MSR SimmerLite

I fired the stove up for the first time on a slab of rock outdoors. The instructions are fairly clear: you open the valve and let fuel wet the whole burner head - without soaking the surrounds of course. Then you shut the valve and light it up. The burner head is rather cunning, it has a rim around the edge that holds some of the priming fuel. There is also a small cup around the bottom that will collect a small amount of spilt fuel. The flame heats the generator tube quite well. When the priming flame has died down you open the valve on the tank - carefully. You do not need any special priming paste or fuel; the normal fuel does just fine.

The usual priming flare was about 30 centimeters (12 in) high: not the sort of thing you want in a tent, of course. The manual recommends that you preheat the stove with fuel in the generator tube: this ensures you start with hot fuel rather than chilling the generator tube with cold fuel when you open the valve. This is an important point for all liquid fuel stoves, both petrol and kerosene.

Assuming I start with a tank of fuel which is still under pressure from the last time I used the stove, that I have a stable base to put the stove on, that the stove is plugged in to the tank, that everything is to hand and I have had some practice, I find that it takes me about 1 minute 45 seconds to get this stove going. That's not too bad - kerosene takes much longer. How long does it take you to get all the bits and pieces together before this stage? Well, that's up to you and your degree of organisation.

Coleman Xtreme

The first time I lit the Xtreme up I simply turned the control valve on gently while holding a lighter next to the burner. It worked just fine. There was no flare up at all, and I routinely light this stove inside my tent. There is a small generator tube at the burner, but it did not seem to need any preheating. Of course, as soon as the flame is alight, the tube gets hot. So if I start from the same state as above, with everything together, it takes me about 2 seconds to get this stove running. It feels much faster, but in the overall scheme of things there is not much to the difference.

Operation: full bore and simmering

MSR SimmerLite vs Coleman Xtreme - 4
Stove setup for the simmer and boil (less the pot lid) tests

I ran two sorts of tests here. The first was at full power to assess the minimum time to boil 1 litre of water; the second was to see how slowly I could heat water to test simmering capability. The first test is all about the big macho advertising claim: "Our stove boils faster than yours." Frankly, so what? I never run a stove flat out like this, but you can't have a stove review without this sort of data. As shown in the picture, I set up the stove with a 180-millimeter (7.1 in) diameter stainless steel pot containing 1 litre of water, put my folding windshield around the stove and pot, and put a digital thermometer in the middle of the pot. The top of the pot was covered for some tests; for others I did not bother, as I wanted worst-case results. The temperature of the water was logged every 5 seconds. Once the water was really boiling I turned the stove off and let the water start to cool.

The results for heating 1 litre of water are shown with the SimmerLite in red and the Xtreme in blue. Note that both graphs are nearly linear in the heating stage; both stoves heated water at a constant rate. The slight change in rate near the top is due to evaporation of steam, since this test was done without a lid. The SimmerLite reached a rolling boil from 21 °C in about 4 minutes 45 seconds, while the Xtreme took slightly longer at 5 minutes 15 seconds. These times are longer than the typical manufacturer claims. I had the SimmerLite going as fast as it could, but I did have the Xtreme turned down a fraction from the maximum. This was due to my reluctance to have flames roaring up the sides of the pot. The Xtreme may have had a slightly faster boil time if I had allowed this.

Time to boil 1 litre of water

MSR SimmerLite vs Coleman Xtreme - 5
The SimmerLite and the Xtreme boiled 1 litre of water in about the same amount of time.

In my opinion, the second test is more important: can I simmer a stew? For this, I need the stove turned down as low as possible. I tested for this by turning each stove down as far as I dared. The Xtreme stove turned down to a very low level and remained stable. The SimmerLite was a different matter. According to reports from other users of the SimmerLite, MSR has said you have to get the stove hot and then turn it down slowly. I interpreted this to mean that it was important to make sure the whole generator tube was hot and remained hot. Even so, I found the flame height on the SimmerLite rather unstable: I could hear the burn rate going up and down without intervention from me. I considered trying to adjust it continuously, but decided this was not acceptable. In the field I am usually busy with other things while dinner is cooking. The test arrangement was the same as before except that in this case I put a lid on the pot to limit evaporation.

Again, the SimmerLite is in red while the Xtreme is in blue. The SimmerLite graph starts at a higher temperature. This is because I had to spend some time fiddling with the valve to get as low a burn rate as possible. In the end, however, the flame on the SimmerLite just went out. That's why the red graph stops where it does: I quickly turned the valve off when I heard the flame go out. For reasons of both safety and cleanliness, you do not want fuel leaking everywhere! I found it very difficult to control the rate of heating with the MSR stove on its lower settings.

Slowest rate of heating 1 litre of water

MSR SimmerLite vs Coleman Xtreme - 6
The Xtreme is far better at simmering than the SimmerLite.

The SimmerLite heated at a rate of 39 degrees Celsius in 8 minutes, or 4.9 degrees per minute. The Xtreme heated at a rate of 39 degrees Celsius in 20 minutes or 2.0 degrees per minute. This means the Xtreme could be turned down to less than half the heating rate of the SimmerLite - plus it was very stable in that mode. In summary, the Xtreme is far better at simmering than the SimmerLite.

The Xtreme turns down so well that extrapolating the above graph suggests that in a bit over 30 minutes the temperature would reach about 70 °C and not go any higher! That is, the heat loss from the pot at high temperature would match the input from the stove - this is simmering! The data from the SimmerLite suggest that equilibrium could have been reached around boiling point if the valve had not crept shut and turned the stove off. It will simmer, sort of, but not very easily or reliably.

Operation: stability

I discussed the three-leg design of both stoves above. In addition to stability on the ground, however, it's also important that the pot be stable on the stove. You wouldn't want your dinner to go sliding off onto the ground!

There are two standard techniques manufacturers use for preventing a pot from sliding off the stove. To contain pots, the inner ends of the pot supports can be tilted upwards to make a cradle. This does not work if the pot is larger than the pot supports, as mine is. The second technique is to roughen the top surface of the supports. Not so much that they chew into the base of a pot and wreck it: just enough to stop any sliding.

The SimmerLite has both the tilted arms and little bumps on the arms. They are smoothed off without any sharp edges. The Xtreme also has tilted arms and notches along the top, but the notches do not reach to the highest points. You can run your hand over the arms of both stoves without getting any scratches. My stainless steel pot seemed to be stable on both stoves, so there appears to be just enough roughness on each one.

Fuel Consumption

I mentioned in my general review of stoves, Got Gas? Stove Theory and How They Work, that you should expect to use a little more weight of petrol than of gas, and that I normally use about 30 grams (1.1 oz) of gas per day to cook for two people. The fuel consumption data during this trial matched those figures, but are of limited value for any other user. The reason is that everyone uses their stove differently, and cooks different amounts. So all I can say is that both stoves are efficient examples of their class.

While fuel consumption was as expected, it may be worth noting that the cartridges for the Xtreme are rather specialised and may be hard to come by in a small country town. It is a specialised winter stove. But then, while spending six weeks walking in the French Pyrenees in 2002 I was able to find standard screw-thread (EN417) gas cartridges more often than I could find Coleman fuel or white gas. In Nepal you might be hard pressed to find anything other than kerosene. You will need to research resources where you are going before deciding what sort of stove is appropriate.


During the course of this field test I did not have to do any maintenance on either stove. MSR provides tools, and these tools were sufficient to field strip the stove. Coleman did not provide tools, but I have never needed to field strip a gas stove anyway.


By now you may have got the impression that I have a slight bias towards the gas stove - towards any gas stove! This is true, and this test has not altered my opinions. Both stoves are good stoves and will give good service. It's just that I find gas (canister) stoves much easier to use than petrol (white gas) stoves.

Figures in graphs are quoted courtesy of

MSR SimmerLite vs Coleman Xtreme - 7

Roger Caffin is a consultant research scientist. He maintains the aus.bushwalking FAQ and Confederation of Bushwalking Clubs NSW web sites. He is the Editor of the Confederation's quarterly magazine and a tester at Roger started bushwalking at 14 with ex-Army gear. He took up rock climbing and remote exploration walking at University with the girl who later became his wife. Over the last four to five years he and his wife have converted to ultralightweight gear. They prefer long, hard walking and ski-touring trips, from Tasmania to north of Sydney and in Europe. They spend at least two days per week walking or ski touring.


"Liquid Fuel Stoves Head to Head: MSR SimmerLite vs. Coleman Xtreme," by Roger Caffin. (ISSN 1537-0364)., 2005-02-08 03:00:00-07.


Reader Comments

You must login to post comments.

New Visitors: Create a new account
Remember my login info.

MSR Simmerlite vs. Coleman Xtreme
Display Avatars
Sort By:
Ryan Jordan
(ryan) - BPL Staff - MLife

Locale: Greater Yellowstone
MSR Simmerlite vs. Coleman Xtreme on 02/08/2005 21:06:18 MST Print View

This forum thread was created to focus on the discussion of the comparison of these two stoves, as presented in the article (M) Liquid Fuel Stoves Head to Head: MSR SimmerLite vs. Coleman Xtreme by Roger Caffin.

Edited by ryan on 02/08/2005 21:06:38 MST.

Douglas Frick
(Otter) - MLife

Locale: Wyoming
Coleman Powermax fuel on 02/09/2005 00:25:01 MST Print View

Thank you for an excellent article.

Can a standard butane/propane gas canister be screwed onto and power the Xtreme stove if Coleman Powermax fuel canisters are not available? If so and if you have done so, did you notice any obvious change in performance?

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Cartridge Fittings on 02/09/2005 02:12:26 MST Print View

"Can a standard butane/propane gas canister be screwed onto and power the Xtreme stove if Coleman Powermax fuel canisters are not available?"
In short, no.
There are three main fittings for resealable gas cartridges: the screw thread invented by Epigas of UK, the Twist/click invented by Campingaz of France, and the Coleman Powermax twist/click. They do look very similar, but none of them are interchangeable.
There will be slight differences in performance, but these differences will be due to differences in the design of the burners and the different mixes of gases in the cartridges. The fitting itself has no significance.

Bill Valentine
(valentine) - F
Coleman Xtreme fuel availability on 02/09/2005 10:30:14 MST Print View

I have had my Xtreme for four years and find it the easiest to light and best simmering stove I have ever had (and I have had many). The only drawbacks to these stoves that I see is the availability of Powermax canisters in smaller towns and the prohibition against shipping these canisters. When planning my 30 day hike of the PCT last year, I wound up having to carry three canisters for the whole trip since I was unable to ship them in my resupplys and wasn't sure of availability in the resupply towns.
Otherwise, I can't recommend this stove highly enough.
Bill Valentine

Inaki Diaz de Etura
(inaki) - MLife

Locale: Iberia highlands
Xtreme weight, Cartridge fitting and fuel blends on 02/10/2005 13:54:23 MST Print View

I wonder about the reason behind the heavy weight of this Coleman stove
compared to a traditional canister stove. I know the legs are a main
factor and I can think of a few others (having never seen one in person)
but I guess there must be something more as the difference is huge. I
ask because I find this somewhat defeats one of the advantages of the
canister stove over the white gas one and I guess there must be a good
reason... but it might as well be that the Coleman stove is over
engineered to make it look more "solid" given its competition in
performance and capabilities are heavy white gas stoves (and not the
lightweight canister ones).

Apart from the valve connection to the canister being different, is
there any reason why a traditional canister stove couldn't use the
Xtreme canister? is the actual fuel any different? and, on the other
way around, any reason other than the valve connection why a Xtreme stove couldn't use a regular butane/propane canister? I think you're answering just this in your previous message but it's still not clear to me.

Finally, I find and odd strategy (unless there's technical reasons for it) the Coleman Xtreme stove valve connection is proprietary and different from any other given one of its main drawbacks seems to be fuel availability? Wouldn't
had it been more reasonable to make that connection through a regular
Lindal valve?

Rick Dreher
(halfturbo) - MLife

Locale: Northernish California
Great article on 02/10/2005 14:03:16 MST Print View

Very nice work and writeup, Roger. I love the slow-burn comparision--first time I've seen that ever!

I'd like to add a couple of points, since I also have both stoves:

* The Powermax cartridges feed liquid fuel to the burner. (Most cartridges deliver vaporised gas.) This is why the burner has a generator tube and why stove works well in any temperature and retains the same fuel mixture from start to finish (no fractionating occurs). The clanging one hears in the Max cartridges is the feed tube.

* In my experience, the quality of Simmerlight's simmer depends a lot on how much pump pressure I use. In general, less is better. I've used it with the old and new style pumps, and the new pump seems to aid simmering as well.

It seems to be harder to find the Max cartridges these days (I'm in California). I hope Coleman continues to support the system.

Bill Valentine
(valentine) - F
re: Coleman's commitment on 02/10/2005 14:20:57 MST Print View

Maybe our friends at BacpackingLight can find out from Coleman what it's commitment is to supplying the Xtreme fuel?

John S.
(jshann) - F
Terminology confusion on 02/15/2005 21:33:52 MST Print View

As a new person to these sorts of stoves, I find the terminology being used to describe them very confusing. The title calls the coleman extreme stove a liquid fuel stove, and Roger says he uses it for his winter trips. At the end of the article Roger says he prefers the gas stove...well both of them are gas stoves. In another thread Roger says he has given up on liquid fuel stoves. The article says he prefers this liquid fuel stove. And I thought I even saw it called a canister stove. What is the dealio?

Ryan Jordan
(ryan) - BPL Staff - MLife

Locale: Greater Yellowstone
Stove Terminology on 02/15/2005 22:30:45 MST Print View

Great question -

Roger's Australian and there are terminology differences among nationalities. Gas to one is not gas to another!

Roger discusses terminology specifically in the article that appeared in the print mag:

Got Gas? Stove Theory and How They Work

Edited by ryan on 02/15/2005 22:31:13 MST.

Bill Valentine
(valentine) - F
extreme fuel on 02/16/2005 10:20:32 MST Print View

So, Ryan, any chance BPL can find out from Coleman what their future plans are for the Extreme stove and especially the fuel availability? It really is a major resupply problem in smaller towns, especially with the post office's ban on shipping fuel.
Speaking of which, has anyone found a way around shipping fuel ahead to trailheads? Closest I have come is having REI ship fuel to designated address, but there it has to be signed for. I talked with several thruhikers last summer who hid there fuel shipments from the PO.

Richard Sullivan
(richard.s) - MLife

Locale: Supernatural BC
MSR WindPro on 02/17/2005 16:47:05 MST Print View

Hi Roger, have you tried the canister version of the Simmerlite which is called the WindPro? If so how would you rate it in comparison to the Xtreme?

Jason Livingston
Simmerlite vs. Xtreme on 04/30/2005 18:30:47 MDT Print View

I enjoyed the article. However, I think a better comparison would have been between the MSR WindPro and the Coleman Xtreme. There are people, like you, who have a bias (that was seen in this review from the start) towards using a cartridge stove, and those who would rather use white gas/multi-fuel stoves because of major advantages and disadvantages. Because of this, many folks, like me, would like to see the indepth analysis that is done so well on this website comparing two stoves of the same family rather than stoves that are as different as the two reviewed here. Albiet the Xtreme is a closer cousin to the white gas/multi-fuel family than other canister stoves, it is still a cansiter stove. I would have found more value in this comparison if it had been between the WindPro than the Simmerlite that would have eliminated, somewhat, your "gas" stove bias.

Tony Burnett
(tlbj6142) - F

Locale: OH--IO
Shipping butane/propane on 11/09/2005 12:08:49 MST Print View

You can ship butane, isobutane and propane via USPS (not sure about fedex or ups) as long as its less than 1L. Which means you can mail one of those big green 32oz Coleman propane containers (used for car camping lanterns, stoves, etc.). You don't need speical paperwork, stickers, etc. You just have to declare the contents when you drop off the package and the post master will mark it "Sufface Mail Only".

See my write-up on Canister access along the AT here.

Edited by tlbj6142 on 11/10/2005 08:38:55 MST.

Bill Valentine
(valentine) - F
Coleman PowerMax fuel on 11/09/2005 12:50:58 MST Print View

Thanks, Tony. Only, I am a bit confused. The PowerMax container I prefer is 300g or 10.6 oz. Are you saying this would be accepted for shipping by the PO? (I still don't have the grams to liter conversion down.Coleman's website doesn't even list fuel for on-line ordering anymore. So we are really at the mercy of the resupply sites we use.
The smaller cannisters mean carrying more bulk over longer distances,a bit of a pain.

paul johnson
(pj) - F

Locale: LazyBoy in my Den - miss the forest
REI and Fuel shipments on 11/09/2005 18:53:13 MST Print View will sell and ship both liquid fuel and canisters via ground. While this doesn't help with the issue of resupply raised in some of the Posts in this Thread. It does further support Tony's very informative post that some fuel shipments are possible.

Tony Burnett
(tlbj6142) - F

Locale: OH--IO
Fuel shipments on 11/10/2005 08:38:14 MST Print View

I should edit my above post, because those big green propane canisters are really 32oz, not 16oz. So, yes you should be able to USPS the 300g Powermax canisters. Just be prepared to mention Pub52 when you arrive at the PO. As mentioned in my FAQ, most PM "just say no".

I'll edit the message now to reflect the 16-32 edit.

Edited by tlbj6142 on 11/10/2005 08:41:00 MST.

David Bonn
(david_bonn) - F

Locale: North Cascades
Re: Fuel shipments on 11/10/2005 08:46:15 MST Print View

I've shipped approved canisters via USPS quite a few times. Like other posters have said, most post offices automatically say no. So you need to be prepared to recite chapter and verse to them.

FedEx ground will also ship canister fuel.

In both cases, common courtesy and common sense require that you tell the people who are taking your package that approved canisters are in the package. After you win the argument they reward you by putting a no-smoking sticker on your package.

Re: Simmerlite vs. Xtreme on 11/20/2005 15:26:17 MST Print View

I'll second Jason's comment that it is really the MSR WindPro that should be compared to the Coleman Xtreme. The WindPro can be operated with the canister inverted, delivering liquid "butane" to the preheat loop, just like the Xtreme. That addresses the issues of cold weather performance and inability to use a windscreen. Every manufacturer makes a remote canister butane stove that can be operated with the canister inverted--these are what should be under consideration for winter use. And as Paul J says, why are we looking at actual boiling? That's wasteful and unnecessary. The bare WindPro weighs 7 oz.

Bill Fornshell
(bfornshell) - MLife

Locale: Southern Texas
Modified Coleman Xtreme Stove on 11/20/2005 15:38:26 MST Print View

I agree with the comments about the Wind-Pro. I have the much older big brother a 12 to 15 year old MSR Rapid Fire remote canister stove that I really like. I get around the cold problem with a canister cozy and a heat pack.

That said the Coleman Xtreme will weigh in about the same as the Wind-Pro when I am finished with it and you can buy the Xtreme for $50 at several places.

I also think the Wind-Pro has or can be adapted to the PowerMax canister.

Edited by bfornshell on 11/20/2005 15:39:42 MST.

Michael Martin
(MikeMartin) - BPL Staff - MLife

Locale: North Idaho
Re: Simmerlite + Powermax on 11/20/2005 16:58:38 MST Print View

Bill writes:

>> I also think the Wind-Pro has or can be adapted to the PowerMax canister.

Bill, any hints on how to do this? I've found the Powermax is the lightest weight fuel system available. Combining it with a windpro is a cool idea.

I Googled around and discovered this, but it weighs 75g!

Edited by MikeMartin on 11/20/2005 19:09:02 MST.

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Re: Terminology confusion on 11/23/2005 02:21:44 MST Print View

> As a new person to these sorts of stoves, I find the terminology being used to describe them very confusing. The title calls the coleman extreme stove a liquid fuel stove, and Roger says he uses it for his winter trips. At the end of the article Roger says he prefers the gas stove...well both of them are gas stoves. In another thread Roger says he has given up on liquid fuel stoves. The article says he prefers this liquid fuel stove. And I thought I even saw it called a canister stove. What is the dealio?

Ahem. Sorry about that!
I have given up on petrol and kero stoves - the sort most people call 'liquid fuel stoves'.
The point I was trying to make was that even butane and propane can be liquid fuels. The Xtreme uses them as a liquid fuel.

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Future of stove articles on 11/23/2005 02:28:53 MST Print View

Hi all

I have been appointed (annointed?) as the new BPL Section Editor for stoves. I will try to keep up with the various Forums, but there are many of them ...

There will be some articles in the future covering some of the questions raised in this Forum, but I can give a few short answers here:

Coleman have no intention of discontinuing the Xtreme stoves. There will be further developments released - some time next year I think.

Despite rumours to the contrary, the Powermax cartridges continue to be available in Europe and the UK.

Shoot-outs between various stoves mentioned should/will happen and be published in BPL.

There are more technical articles like the 'Got Gas' one in the pipeline, but don't ask for details: we never give them in advance.

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Re: Re: Simmerlite + Powermax on 11/23/2005 02:34:57 MST Print View

> > I also think the Wind-Pro has or can be adapted to the PowerMax canister.
> Bill, any hints on how to do this? I've found the Powermax is the lightest weight fuel system available.
> I Googled around and discovered this, but it weighs 75g!

The Vaude adapter will let you put a common screw-thread stove onto a French CampingGaz resealable cartridge. I have used a home-made version for months.
As far as I know, there are NO adapters which will mate with the Powermax cartridge.