McNett Gore-Tex Fabric Repair Kit

Features:

REPAIR KIT INSTRUCTIONS
The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products.

• Patches should be kept in sealed plastic bag until used.
• Area to be repaired must be clean and dry.
• Patch will not adhere effectively to loose debris, grease or oil.
• Patch should overlap tear by at least ½" in all directions.
• Remove release paper from back of patch. Lay GORE™ product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area.
• Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.
• The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.

For permanent repair, W. L. Gore & Associates, Inc. can provide the name and phone number of a certified repair facility. If you have any questions or would like more information, please call 800-431-GORE.

Specifications:

• 1 round patch - 3 in (7.6 cm) diameter
• 1 rectangular patch - 2 x 4 in (5 x 10.1 cm)