Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
FS: Spinnaker Tarp Wall Panels
Display Avatars Sort By:
Mike Maurer
(maurer) - F - M

Locale: Oregon
FS: Spinnaker Tarp Wall Panels on 07/25/2007 11:23:11 MDT Print View

Hey gang,

After I stopped designing and manufacturing tarps for Gossamer I made a prototype Tarp that was the same wall length and shape as my spinnshelter, but was 6" taller. I wanted to be able to sit up more comfortably so I added some head room. I just found 20 of those wall panels that were never made into shelters, and am willing to sell these raw panels. Essentailly what you would be buying are 2 pre-cut spinn cloth wall panels (including pre cut catenary ridge)that are the same shape as a spinnshelter wall, only with 6" more fabric along the bottom edge. You could then easily sew up the caterary ridge and have a brand new tarp (no doors though). Weight of 2 panels is only 5.5 oz.

I have 20 panels total, so there are 10 sets available.

$75 per set. Ships from zip code 92081. Total shipping weight is roughly 8 oz.

maurer at earthlink dot net.

I have also posted this in the Gear Swap section.