FS: BPW Pyranet 2 with Trailstar MOD.
Display Avatars Sort By:
Matt B
(mbnow) - MLife

Locale: New England
***SOLD*** BPW Pyranet 2 with Trailstar Mod. on 09/29/2013 05:32:47 MDT Print View

This is the Pyranet 2 from Bearpaw WIlderness Designs.

I purchased this from a BPL member over a year ago and I have only used it a couple of times.
The previous owner had not used it much at all.
Also the previous owner had put a piece of cuben tape over a pine needle hole he found. I cannot see where this was done.

The innernet is in very good condition.

It has the Trailstar modification which makes it 2" longer and the door is move to one end. There are 2 small side zippers for accessing gear.

It has cuben floor and cuben up 10" on all 4 sides.
Cuben is .74 for the floor and sides.
Also has the upgrade to .7 nano-seeum

The weight is about 13oz.

link to BPW site. To build new would be over $300
http://www.bearpawwd.com/shelters_floors/pyraNet2.html

Asking ***SOLD***. Paypal only. US shipping only.

BPWbpw
This shows it being used under the Trailstar (which is sold)
pyranet 2

Thanks,

Matt.

Edited by mbnow on 10/01/2013 15:42:20 MDT.

Ben Wortman
(bwortman) - M

Locale: Nebraska
size on 09/29/2013 07:34:47 MDT Print View

What are the actual inside dimensions? Is it the standard size?

Matt B
(mbnow) - MLife

Locale: New England
Size... on 09/29/2013 12:37:38 MDT Print View

**** SOLD****Just checked on BPW site and Trailstar mod makes the dimensions: 92"L x 58" W x 44" H

Also just confirmed the weight at 13 1/8 oz or 372 grams.

Edited by mbnow on 10/01/2013 15:42:59 MDT.