KX-pac 5.0
Display Avatars Sort By:
K C
(KalebC) - F

Locale: South West
MYOG X-pac backpack on 05/27/2013 09:40:53 MDT Print View

I just got back from a solo trip in Zion and got to use my new pack, it worked great, I may add a sleeve inside to put the GG sit pad in to hold it in place.

Front and bottom VX-21
Back and sides VX-07
Side pockets 1/8 rawhide mesh and Dyneema X
Harness- 3D mesh, Dynemma, 1/4" CCF
Removable back pocket VX-21, Dyneema X, Uretek #5
Dyneema X waist pocket lined with 3D mesh for camera.
Roll top closure with Y-strap, horizontal attachment points & shock cord system.
Weight is 13-15.75oz depending on the options.

x1
x2
x3
x4

Edited by KalebC on 05/27/2013 14:37:52 MDT.

Nathan Hays
(oroambulant)

Locale: San Francisco
Re: MYOG X-pac backpack on 05/27/2013 15:22:01 MDT Print View

That must feel great to hit the trails with your own pack! I'm about to start in on one for myself.

I like the dyneema above the mesh on the sides. Keeps it from stretching too far. I've had a bottle 'roll' out of a stretch mesh pocket. I also like how the mesh doesn't reach the ground where it can pick up sticks and muck.

Does the waist webbing go under the dyneema and all the way around or are those just stubs sewn to the dyneema/CCF/3D?

Where did you source the VX?

Nice job.

K C
(KalebC) - F

Locale: South West
RE: on 05/28/2013 21:01:02 MDT Print View

Thanks. The 1" webbing is sewn to only the end of the waist belt through the dyneema/3D/CCF, all critical attachments are triple reinforced with Tera 40. I got the VX fabric from rockywoods, hardware from Zimmerbuilt.