I bought this pot used off swap and it came without a lid. Looking for one to fit, whether it is stock or not. Inside diameter of rim is roughly 4 3/8 inches.
This is my favorite pot.The SP900 (Snow Peak) Ti lid from Four Dog Stoves fits great.... and the Mini-Bull Design aluminum SP900 lid fits as well too.I have both lids and they both fit my Evernew 800 ml kettle (ECA318)
Edited by tr-browsing on 04/23/2013 11:44:36 MDT.
Tony, thanks so much for this info. I'll give this ad or day or two and if no one bites, I will buy a lid. Thanks!
Hi, i have a snow peak 900 fry pan lid i would part with.ThanksPaul
The SP900 fry pan lid does not fit an Evernew 800 ml kettle, as the fry pan lid is designed to fit on the O.D. of the pot ... comparing the dimensions looks close enough but the Evernew 800 ml kettle O.D. does not scribe a round circle because of the pour spout sticking out.... a SP900 lid that fits the I.D. of the pot can be successfully used.
Edited by tr-browsing on 04/24/2013 17:19:00 MDT.
I've not tried it. It works great as a lid on my 1L evernew pot that also has a spout.Ymmv
The Kettle (ECA318) has an inner diameter of 4.88" (according to Evernew's site)The SP fry pan lid has an inner diameter of 5" (according to Snowpeak's site)The Evernew's 1 liter pasta pot (ECA 522) has an inner diameter of 4.65" (according to Evernew's site)yup, YMMV
Edited by tr-browsing on 04/24/2013 17:19:54 MDT.
If we are basing on specs, wouldn't you want the outside diameter of the pots? Also, the 5" for the pan is at the widest spot, it tapers down to the bottom of the pan.
You must login to post.
MEMBERSHIP IS REQUIRED TO POST: You must be a Forum, Annual or Lifetime Member to post messages in the backpackinglight.com forums.
SUBSCRIBE NOW »