Simple MYOG stove for Caldera Clone
Display Avatars Sort By:
Josiah Vandervelde
(eternalnoob) - F - M

Locale: Florida
Simple MYOG stove for Caldera Clone on 04/19/2013 15:22:23 MDT Print View

I'm going to make a Caldera Clone for a stoic 700ml pot. I'm looking for a simple alcohol stove design to pair it with.

It doesn't have to be MYOG, but I don't want to spend a bunch of money. PIF stove would work too ;)

I'm planning on giving my little brother the whole setup for his birthday.

Edited by eternalnoob on 04/20/2013 08:31:44 MDT.

Dustin Short
(upalachango) - MLife
Re: Simple MYOG stove for Caldera Clone on 04/19/2013 18:08:44 MDT Print View

Are you asking for one? Because that should be posted in the Gear Swap. If you're asking for directions or links on how to make one then this forum is appropriate.

Either way, since the stoic 700 is kind of a narrow pot you probably want a simple center burning alcohol stove. A tea light with extended walls (use aluminum tape on the inside and outside to raise the walls a bit higher) paired with a CC set at the appropriate height would probably work quite well.

Josiah Vandervelde
(eternalnoob) - F - M

Locale: Florida
Re: Re: Simple MYOG stove for Caldera Clone on 04/20/2013 08:32:38 MDT Print View

Sorry, yeah I was looking for a design. I'll search the tea light idea. Thanks.

Mole J
(MoleJ) - F

Locale: UK
mini chimney on 04/20/2013 09:56:27 MDT Print View

look at Zenstoves site. The mini chimney (red bull can) is quick and easy to make and works well in a cone. I used one for 3 years till I bought a starlyte.