November 20, 2015 8:16 PM MST - Subscription purchasing, account maintenance, forum profile maintenance, new account registration, and forum posting have been disabled
as we prepare our databases for the final migration to our new server next week. Stay tuned here for more details.
Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
Premixing AquaMira
Display Avatars Sort By:
Lance Marshall
(Lancem) - F - MLife

Locale: Oregon
Premixing AquaMira on 04/02/2013 20:14:05 MDT Print View

I first heard of premixing AquaMira from BPL, back when they sold dropper bottles from the BPL store. I was intrigued, but continued to mix one batch at a time. I carried extra mixing caps to mix multiple batches.

In 2010, I met a couple thru-hiking the PCT. They began their thru-hike using a filter, switched to AquaMira around Kennedy Meadows and soon tired of waiting five minutes before adding it to their water. They began premixing a whole set of AquaMira into the empty bottles from the previous set. As we hiked along together, they could scoop and treat water on the go while I was encumbered with the mixing and waiting process. Anecdotally, they hadn’t gotten sick and I began to consider premixing.

In 2011, Mike Clelland published his book “Ultralight Backpackin Tips” in which he describes premixing a day’s (or weekend; I can’t remember) supply of AquaMira. This additional encouragement led me to trying the practice.

I tried premixing a day’s supply but was still curious about premixing more which lead me to testing the parts per million concentrations of Chlorine Dioxide in water treated with premixed AquaMira.

I purchased Chlorine Dioxide test strips formulated to measure 1 to 10 parts per million.

Next I premixed approximately 30 doses of AquaMira in an empty AquaMira bottle.

Over the next 33 days I compared the ppm concentration of Chlorine Dioxide in water treated with freshly mixed AquaMira against water treated with the premix.

CLO2 PPM Table
I can only speculate why the CLO2 ppm in the premix was often greater than the CLO2 ppm in the fresh mix. Perhaps the fresh mix ‘off-gassed’ enough CLO2 during the 5 minute waiting period to account for the difference.

Although not unexpected, I can only speculate why the premixed ppm dropped off. Was it because of the passage of time or did it ‘off-gas’ each time the bottle was opened? There are a lot of variables unaccounted for: temperature, humidity, wind, atmospheric pressure, exact drop size, etc.


CLO2 test (18)

Typical results: Strip on right indicates greater CLO2 ppm than strip on left.
CLO2 test strips (08)

Hope this was interesting.

Edited by Lancem on 04/02/2013 20:18:47 MDT.

Matthew Black
Re: Premixing AquaMira on 04/02/2013 20:40:09 MDT Print View

Nice write-up. Thanks for performing the experiment.

Todd ~

Locale: The front range
Nicely done! on 05/08/2013 15:47:23 MDT Print View

This is an elegant experiment. Well done. A corollary study could be done adding a known quantity of coliform bacteria (e.g. E. coli) to sterile water and seeing which method killed more bacteria. I may try this with my own preferred water treatment, a UV pen.

Edited by Narrator on 05/08/2013 15:51:40 MDT.

Christopher *

Locale: US East Coast
Re: Nicely done! on 05/14/2013 18:22:08 MDT Print View

I have always limited myself to a single day of pre-mix. From what I understand the manufacturer wont even comment on anything but mixing for immediate use. This is really interesting. Thanks!

Derek M.
(dmusashe) - MLife

Locale: Pacific Northwest
I don't think this test was measuring a relevant concentration... on 09/26/2013 02:18:33 MDT Print View

I've had the same question for a while when it comes to premixing Aquamira.

It's nice that you did this test, but I suspect that your test strips might be too sensitive to actually tell you anything relevant, and this is probably why you are getting sort of weird results.

1 - 10 parts per million is an exceedingly small concentration of Chlorine Dioxide. I'm not sure what the exact concentration of chlorine dioxide is in the mixed (activated) Aquamira solution, but my guess is that it is at least several orders of magnitude higher than 10 ppm.

As such, you could have nearly all of the original chlorine dioxide break down through natural chemical decay over time and still get a positive result on your strip.

For example, if the initial activated solution is even 1% chlorine dioxide (1 part per hundred), then you would still get a positive reading on those strips even if there was only one ten-thousandth of the original chlorine dioxide present.

Is this making sense?

Part of the reason that I'm dubious of your conclusions is because it's already been pretty well established in the scientific literature that chlorine dioxide is a fairly short-lived chemical when exposed to the environment at room temperature.

One study pegged the half-life of chlorine dioxide in a municipal water supply at 93 minutes:

Assuming that this is relatively accurate, it would mean that after your activated Aquamira solution sits around for only 4 hours and 39 minutes, there will only be about 12.5% of the original chlorine dioxide left.

For all these reasons, I think that real test needed here is one that probes the exact concentration of chlorine dioxide in the activated solution over time. I'd really love to see that curve, but it would take a full chemistry lab to get this result.

I know McNett (maker of Aquamira) has this data, but I'm sure for legal reasons they aren't sharing it with consumers. Frustrating...

Edited by dmusashe on 09/26/2013 02:37:00 MDT.

Andrew F
(andrew.f) - F

Locale: San Francisco Bay Area
Re: Premixing on 09/26/2013 07:14:57 MDT Print View

I agree with Derek... The target concentration for Aqua Mira is roughly 5 ppm in the 1 liter of water after adding the mix to it. This means that the mix is closer to 5000 ppm, assuming you make about 1 mL to treat 1L (which may not be exact but is reasonably close.) That's way above the range of your test strips. You need to add the recommended dose to 1L of water and measure the ClO2 concentration in the water with your strips at each data point.

Lance Marshall
(Lancem) - F - MLife

Locale: Oregon
Re: Premixing on 09/26/2013 11:34:12 MDT Print View

Thanks Derek and Andrew.

"Over the next 33 days I compared the ppm concentration of Chlorine Dioxide 'in water treated with' freshly mixed AquaMira against 'water treated with' the premix."

I should have made this clearer by saying that each day I mixed the solutions with 1 liter of water per the Aqua Mira instructions to attain the target 5ppm.

The test strips with a range of 1 to 10ppm were just right!

In regards to one study pegging the half-life of chlorine dioxide in a municipal water supply at 93 minutes:

I don't doubt a short half life after diluting to 5ppm, however, I believe that the 10000 ppm premix concentration (.5ml per L water = 5ppm) in a closed container is much more stable and therefore has a much longer half life than after diluting to 5ppm in water.

I hope this helped.

Edited by Lancem on 09/26/2013 11:42:48 MDT.

Andrew F
(andrew.f) - F

Locale: San Francisco Bay Area
Re: Premixing AquaMira on 09/26/2013 11:42:37 MDT Print View

Ok Lance, that makes more sense, sorry for not reading more carefully. Do you have actual #s for what the measured premix concentration was each day instead of just greater than, less than, or equal?

A few of my coworkers have PhD's in physical chemistry. I have no knowledge of the chemistry of how ClO2 is produced from either the tabs or mix bottles, but if we have any intelligent questions (or maybe a paper I could reference?) I would be happy to talk to them. We also make a few gas analyzers that measure HCl concentrations but I am not sure if there's any way to use that for detection of ClO2.

Edited by andrew.f on 09/26/2013 11:49:22 MDT.

Lance Marshall
(Lancem) - F - MLife

Locale: Oregon
Re: Premixing AquaMira on 09/26/2013 11:53:47 MDT Print View

Sorry Andrew, I chose not to record actual ppm numbers. The 'color charts' on two different vials of test strips weren't quite the same. Also, after researching clo2 test strips, I concluded they weren't accurate enough for specific numbers, but fine for comparison between two tests using strips from the same batch. The cost of a more accurate clo2 test kit using liquid chemicals was too expensive for me.

More stuff:
I did play around with 2.5ppm and 10ppm and could see the difference on the test strips. The color on the strips after wetting faded noticeable over a few minutes, so I did the comparison strips simultaneously (within a few seconds of each other).


Edited by Lancem on 09/26/2013 12:05:16 MDT.

premix on 09/26/2013 19:07:59 MDT Print View

The chemistry isnt real straight forward. You can have multiple chlorine ionic species present. Without knowing what the test strips are responding to, its hard to say what is really being measured. I suppose I could figure it out, but Im too lazy.

However, I can say I think there is a big difference mixing a small amt of the AM in an open cup, and a large amount in a more closed container. I think quite a bit escapes during the 5 min wait time time in the open container when you follow directions.

This is part of the issue with certifying the drops as a purifier with the EPA, very hard to control the final resulting concentration.

I have mixed it by putting drops directly into the small black 3ml dropper, putting the lid on and shaking. If you do this, it comes out more concentrated it seems. The yellow tinge of the treated water is noticably darker, and the taste is stronger. I really think that mixing a bunch directly in the little black vial (with limited air exposure/volume ratio) results in a noticeablly stronger than intended premix. It has been hard to drink the water before due to the taste, especially if seal the top and shake to mix.

Sometimes when the premix is added after doing this way, the water will have a smoke haze above it when the drops hit it.