Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
liquid feed stand (MO:も)
Display Avatars Sort By:
Yukio Yamakawa

Locale: Tokyo,JAPAN
liquid feed stand (MO:も) on 05/01/2007 02:15:06 MDT Print View


This stand can be made on one. own using a plastic sheet and a rubber band. This is an example. Plastic sheet 9g, rubber band It is 1g. a plastic plate is bent in the form of M -- if a few is heated, it will be bent simply. After hooking a rubber band on one of the two and turning it once, it hangs on another side. A fear of separating from a can with the work of this twist disappeared. It could not simplify any more any longer. From the form of two parts to constitute,It's named to" M O (も) "

Edited by JSBJSB on 05/01/2007 02:22:54 MDT.

s k
(skots) - F
Re: liquid feed stand (MO:も) on 05/01/2007 07:11:43 MDT Print View

Above and beyond the enviable 10 g stand, stands your management of the flex steel hose. Very nice.

Joshua Mitchell
(jdmitch) - F

Locale: Kansas
Re: liquid feed stand (MO:も) on 05/01/2007 07:13:51 MDT Print View

Well, you can't get much more simple than that... nicely done.

Michael Davis
(mad777) - F

Locale: South Florida
Re: liquid feed stand (MO:も) on 06/22/2007 11:36:32 MDT Print View

Thanks Yukio,

I use that stove (MSR WindPro) with the canister upside-down for my winter set-up. Due to MSR's omission of a swivel hose connection at the canister (hint, hint) I'm always fighting to keep the canister stable and the valve accesible. Otherwise, I love this solution for winter camping.