Forum Index » GEAR » PyraNet 2 Height For DuoMid

Display Avatars Sort By:
(jpovs) - F - M
PyraNet 2 Height For DuoMid on 03/03/2013 06:10:57 MST Print View

Hi, I am looking at ordering a PyraNet 2 net tent from BearPaw Designs for my DuoMid and curious what height you would recommend ordering the inner net at? Im thinking somewhere around 48" or 50" height, but want to see what has worked best for others. I plan on setting it up most of the time using the Locus Gear DPTE (dual poles) and having the tarp raised a little off the ground for ventilation.
MLD DuoMid standard height is 54" for the tarp and 46" for there inner net.
Bearpaw Designs PyraNet 2 standard height is 44" for there inner net.

Not sure if it matters but the options I'm looking at going with for the inner are 96" extended length, 30d floor, 7d nettin, no hole in the floor (for center pole) and full right zip.

Thank you in advance for your suggestions.

(jpovs) - F - M
Re: PyraNet 2 Height For DuoMid on 03/04/2013 08:34:50 MST Print View

Any inner net height suggestions would be welcome. Thank you.

Maciej Parvi
it is ok to have a standard hight on 03/04/2013 08:37:21 MST Print View

I have a standard hight and it is just fine inside Cuben Duomid.

John C
(jcinaz) - M

Locale: Phoenix AZ
Re: PyraNet 2 Height For DuoMid on 08/06/2013 12:46:20 MDT Print View

Josh, Did you get the BPWD NetTent in the longer and higher size? If so how do you feel it worked out? I am also tempted to go larger to fill the space better but I also need very good ventilation and will most of the time pitch the Duomid high for that reason.

I would have sent a pm, but email was not setup on your account to do so. John