Garth, I have been using the modified Starlyte with my 0.9L Evernew pot & sidewinder. It really does work well together. I don't use the ti stakes to lift my pot, but instead just place the pot in as one would for Esbit, so that the lip of the pot is resting on the top of the cone. This will bring the bottom of the pot closer to the intended distance between pot & stove.
I will admit, it is not the quickest stove (as other's have mentioned), although, it is rather efficient. I would imagine that by going with the regular version of the Starlyte it would indeed slightly increase boil times, but would also slightly decrease fuel efficiency (although, I would wager it would still be perfectly acceptable).
I have read of at least one other person buying the moded version, giving it a try, and then they simply removed the ring that Dan has added to choke the flame a bit, which turned it into the regular version of the stove. (Be aware though, once the ring is removed, it may not be possible to replace it). OTOH, as inexpensive as they are, maybe you could pick up one of each. Then you can keep them both, or sell the one you didn't want...
Anyway, here is a write up and a video I did of my set-up: