Packaging Down for Shipment?
Display Avatars Sort By:
Daniel Russell
(Superfluous_Grizzly)

Locale: Creation
Packaging Down for Shipment? on 02/04/2013 18:32:26 MST Print View

I have down (split in ounces) that I need to ship to a forum member (Konrad) and I need a method of packaging the down.
Anyone have some insight?

Edit: I forgot to mention that it is super lofty 900 fill, not some cheap stuff. Losing down is not an option.

Edited by Superfluous_Grizzly on 02/04/2013 18:33:19 MST.

Greg Mihalik
(greg23) - M

Locale: Colorado
Re: Packaging Down for Shipment? on 02/04/2013 20:40:01 MST Print View

I'm missing something..."I have down (split in ounces)..."

Just laying there on the table?


In any case, a piece of mosquito netting taped over the end of a vacuum cleaner wand will allow you to grab and compress down into a wad. Place a ziplock over the wand, turn off the vacuum, etc, etc.

If you are "collecting" a lot of down, add a removable tube to the wand - like a toilet paper tube. That will allow you to accumulate quite a bit. Find something to work as a plunger to push the down into a ziplock.


Or provide a few more details.

Edited by greg23 on 02/04/2013 20:44:52 MST.

Daniel Russell
(Superfluous_Grizzly)

Locale: Creation
Hah! on 02/04/2013 21:25:37 MST Print View

Greg, thanks for the reply and you're right... I should have been much more specific.

Of course its not just sitting on the table! I mean... I'll be the first to admit I'm a bit spacey... but there is still something rattling up in the ol' noggin.

Anyhow, I have it stuffed in baffles of a DIY UnderQuilt, uncompressed. I know methods for retracting the down so that is no issue (I use the vacumn/noseeum combo for retracting). I'm confused how I can effectively stuff the down into a ziplock.
Since the Ziplock is air-tight, wouldn't the method you suggested cause potential loss of down due to air pockets escaping from the top corners of the ziplock? Airflow is what I'm trying to avoid. I could maybe poke pinholes in the bottom of the ziplock but then down has potential to escape.
Perhaps a breathable textile, like Tyvek, would work? I have tons of tyvek priority mail envelops lying around.
Anyone?

Edited by Superfluous_Grizzly on 02/04/2013 21:26:22 MST.

Greg Mihalik
(greg23) - M

Locale: Colorado
Re: Hah! on 02/04/2013 21:35:29 MST Print View

I've done OK with a sandwich size ziplock. Yes, you trap fibers in the zipper but in the big scheme of things, not to bad.

One idea comes to mind.

Sew a long tube of netting, then stitch across it at, say 6" internals. Cut it into 6" sections. Place one over the vacuum wand and roll it back out of the way. Collect your down, roll the mesh bag up and over the down, fold and staple or tape the open end.

Konrad .
(Konrad1013) - MLife
Down on 02/04/2013 22:02:38 MST Print View

Hey Daniel, I'm not too worried about losing a few feathers, and also think that it's minor in the grand scheme of things. Not sure how much this would affect shipping costs but I wouldn't mind if you just threw it all in a larger cardboard box and just taped othe hell out of it so that none gets out during transport. Maybe put it all in a tall garbage bag and compress it? I'm not too worried about compression damage especially because it'll only be for a short time.

Daniel Russell
(Superfluous_Grizzly)

Locale: Creation
Ingenuity prevails! on 02/04/2013 22:04:13 MST Print View

That is quite a brilliant plan Greg. I'm not sure if I have enough noseeum but great idea!

Nick Gatel
(ngatel) - MLife

Locale: Southern California
Re: Ingenuity prevails! on 02/04/2013 22:12:43 MST Print View

Get a BIG ziplock, they don't weigh much. Add down. Now fold over the top - don't zip it. Slowly compress the down holding the top folded. Wrap in duct tape.

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Re: Packaging Down for Shipment? on 02/04/2013 22:35:03 MST Print View

What's the matter with simple plastic bags? Even bread bags if you can find some without holes. Forget the high-tech!

Insert down.
Close end in fist lightly, squeeze bag to expel air, double end over and wrap with elastic band or fridge wire tie.

Cheers

Daniel Russell
(Superfluous_Grizzly)

Locale: Creation
Re: Re: Packaging Down for Shipment? on 02/04/2013 22:42:29 MST Print View

Right on. Thanks everyone!
Perhaps I was overcomplicating things. I'll try the ziplocks as Greg mentioned in the first reply.
No shortcuts Konrad, I must make sure it arrives safely! :P I used to work at UPS and if any other parcel services handle their packages like we did... then nothing is safe unless it's bombproof!
I'd feel horrible if it got to you and the package was expelling down.

jerry adams
(retiredjerry) - MLife

Locale: Oregon and Washington
Re: Re: Re: Packaging Down for Shipment? on 02/05/2013 08:56:55 MST Print View

Hammockgear sent me down in Ziploc, inside cardboard box.

Keep taking bits of down with fingers and stuff in bag. Zip bag closed.

I've also taken down from a garment. Slowly ripped the bext baffle open. Maybe shake out a little very slowly into a large plastic container or box.