Forum Index » GEAR » VB shirt


Display Avatars Sort By:
Chad Miller
(chadnsc)

Locale: Duluth, Minnesota
VB shirt on 12/01/2012 10:57:00 MST Print View

Hello all!

After much online searching I've decided that the commercially available VB jackets (all two of them) simply won't do it for me. RBH Designs jackets are simply too warm and way too costly. Warmlite's jackets simply don't fit me right.

As such I'm looking to find someone that will make me a sillnylon VB jacket. I'm looking for something very similar to the AGG silnylon rain jacket but with sippered pit and forearm vents.

http://www.antigravitygear.com/antigravitygear-ultralight-rain-jacket.html

I'v already contacted AGG about doing a custom jacket but it looks like they don't do that level of customization.

Anyone out there have resource they could point me to / put me in contact with? I'd be fine with simply sending someone who is good a sewing sillnylon to add some small zippers to my AGG silnylon rain jacket.

Thanks for all your help!

Jeremy Gustafson
(gustafsj) - MLife

Locale: Minneapolis
Re: VB shirt on 01/15/2013 19:57:46 MST Print View

Chad, did you ever find someone to do this for you? I'm looking to have the same done.

Andrew Zajac
(AZajac)

Locale: South West
VB barrier shirt on 01/15/2013 20:10:15 MST Print View

Funny that you bring this up. I have been talking with zpacks about their cuben jacket that is no longer available on their website, but which you can still order for $165. You can also try luke's ultra light and their 7d silnylon shell for $150 or the 30d silnylon for $69. You may have to seal the seams in luke's ultra light stuff.

http://lukesultralite.com/content/7d-silnylon-ul-rain-shell
http://lukesultralite.com/content/silnylon-rain-shell
http://www.zpacks.com/accessories/cloudjacket.shtml

Jeremy Gustafson
(gustafsj) - MLife

Locale: Minneapolis
Re: VB barrier shirt on 01/15/2013 20:44:31 MST Print View

That's funny... I just sent an email to Luke to see if he would custom make something for me. I'll let you know how he responds. Ideally I wear a medium tall, wanted the silnylon, without a hood, with full pit zips and and velcro cuff.

Justin Baker
(justin_baker) - F

Locale: west coast best coast
Re: VB shirt on 01/15/2013 21:23:20 MST Print View

You could always cut 3 holes in a trash bag and wear that. It wouldn't block the sweat from your arms, but it would work for the chest.

Hiking Malto
(gg-man) - F
Pit zippers on 01/16/2013 04:26:33 MST Print View

Doesnt this defeat the very concept of VBL? When I made my VBL jacket I purposely have no zippers to provide a better sealed environment.

Edited by gg-man on 01/16/2013 05:35:08 MST.

James Marco
(jamesdmarco) - MLife

Locale: Finger Lakes
Re: Pit zippers on 01/16/2013 04:46:58 MST Print View

I am not sure I understand your need for a VB shirt if you aren't sleeping.

Jim Colten
(jcolten) - M

Locale: MN
Re: Pit zippers on 01/16/2013 06:52:04 MST Print View

I am not sure I understand your need for a VB shirt if you aren't sleeping.

Try hiking with some vigor without a VB at temps below 0F and windy in clothing adequate to keep you comfortable (very slightly chilled or no more than just barely warm) for a couple hours.

When finished you'll find a lot of frozen water in one of your layers. Merely inconvenient if you have a warm place to stay and dry out overnight. Much worse than inconvenient if you are your own sole source of heat for the night ... and subsequent days&nights

Andrew Zajac
(AZajac)

Locale: South West
Re: Pit zippers on 01/16/2013 08:08:39 MST Print View

From Andrew Skurka's website

pit zip a good option for medium activity?
> Skurka: Yes, a very good option. Ditto for arm vents. And a two-way zipper. There are many situations where you want some of the warmth and wind protection of a shell, but not all of it. If your VBL layers do not have good venting, you’ll hate them during these times.

Michael Cheifetz
(mike_hefetz) - MLife

Locale: Israel
Ben@goosefeetgear on 01/16/2013 11:51:11 MST Print View

I was looking at similar thing a while ago (didnt follow through with the project due to $$$ restraints) but Ben Smith @goosefeet gear was up for the task - making it from SilNyl or cuben.....

Mike

Matt Foehrenbacher
(matt_f) - MLife
Chad's account is gone - e-mail if if needed on 01/19/2013 16:03:19 MST Print View

Hi guys -

I was out backpacking with Chad Miller on the SHT last week and he asked me to pass along that he no longer has an account at BPL:

"I was wondering if you could do me a favor. I got a PM from someone about adding zippers to my silnyon jacket. I can't respond to it due to my BPL account being deleted. If possible could you post up my gmail address in this thread."

Anyway, his e-mail is c e m i l l e r 5 1 1 at gmail dot com (take the spaces out, use @ etc). Its too bad he's not around BPL anymore - he knows a lot about winter camping :)

Matt