Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
Titanium wind screen holder (simple)
Display Avatars Sort By:
Mike Clelland
(mikeclelland) - MLife

Locale: The Tetons (via Idaho)
Titanium wind screen holder (simple) on 02/09/2007 08:34:00 MST Print View

The titanium windscreen is a weird little piece of gear. But it's so light and thin that it feels like I am handling something fragile when I touch it (it's not, it's actually pretty tuff) But, it want's to spring open when its rolled up, and the edges are sorta sharp - so it's a something I feel like I need to be careful with. And storage is tricky.



Here's how I store my titanium windscreen.

I've cut a small rectangle of TyVec (waterproof, sorta) and then I rolled it into a little tube. I used a tiny bit of Elmer's wood glue (also waterproof, sorta).

It's sized to fit my rolled up titanium wind screen, and weighs .1 ounce.

The wind-screen is 4 inches tall, and the tube is 4.5 inches tall. THe TyVec tube is about an inch wide.

Roll up the TITANIUM wind-screen, slide it in the Tyvec tube, and it's done! It carries nice!

peace from idaho,
M!