EDIT: Update: Ok so a few people have decide to drag this project back from the dead. ;)
I've gotten some PM's requesting some of these. The original run ended up only being a small handful, and I never posted final pics, but Mr. Evans was kind enough to post a review and some photos at: http://www.suluk46.com/RandD%20-%20RD38%20UL%20Titanium%20Knife.html
I'll leave some of the original post for posterity, and because I don't want to retype an explanation.
The price is going up a bit on these, probably to $80 without a kydex sheath, $85 with one, and $90 cord wrapped and sheathed like the ones in the link.
I never settled on a UL sheath I liked, but as mentioned, these can be safely carried a number of ways, as they're not as "finger sharp" as a steel edge. I admit it sucks to have a sheath that weighs almost as much as the knife, although it's still a 15gram package. I do still have some ideas for other options.
I'm *NOT* taking upfront payment on these. My schedule is chaotic, and I can't handle the stress of owing people products they've already paid for, so if you are interested in one, just PM or email me, I'll make a list, and contact you when I've got a batch ready.
Anybody I promised one before that I never sent one, let me know.
OLD POST; edited.
It's about time right?
New from me, TSS Ti Field Scapel.
This is self sharpening, chisel ground, industrially carbide impregnated' titanium utility knife, which requires little or no maintenance, excels at cutting tasks, and weighs roughly 8grams.
OAL is 5", 0.5" wide, 0.063 thick.
The pictures following show the final proto, which was hand ground out of 0.075 6al4v Titanium, and weighs 9g. The production pieces will be waterjet out of 0.063 6al4v, and weigh a little less. The edge bevels will be hand ground by me, and the carbide spark deposited also by me, using a very expensive industrial spark depositor made by Electro Arc corp. While some of you may be familiar with hobby carbidizer units, and their poor performance, rest assured that the results from the industrial machines are nothing similar. This unit will deposit a single pass layer of tungsten or titanium carbide of 25 micron, where as the small units are at best around 2 micron. On the max setting, this machine sparks like a mig welder.
This blade as mentioned, is self sharpening, due to the single side deposition of carbide, and the chisel grind, which implements the so called "beaver tooth" effect. The softer titanium wears down at a higher rate than the thin layer of ultra hard carbide, which exposes the carbide layer, creating a micro serated edge. In fact, the sharpness will increase after use from the initial grind.
These blades are microserrated and work extremely well for cutting tasks, slicing, cutting rope, bags, sticks, clothes, food, etc, however are not a substitute for a steel blade where impact use is required. These blades are not suitable for batoning or axe type chopping, and won't be warranted against such abuse.