Forum Index » Make Your Own Gear » Ultra low style wick-jet alcohol stove


Display Avatars Sort By:
Yukio Yamakawa
(JSBJSB) - F

Locale: Tokyo,JAPAN
Ultra low style wick-jet alcohol stove on 03/02/2012 09:35:20 MST Print View

http://www.youtube.com/watch?v=h2PgG0Mu1h0

http://ikaros.air-nifty.com/ikaros/2012/02/post-e859.html


Hello, everyone
This is an alcohol stove burning in the new mechanism.
Its name, "3729 stove"
wick-jet cyclone burning, ultra low style,total 37mm hight with legs, 29gr weight only.
YouTube also (dutro76), I have put the video.
After 320 seconds from ignition, and then 400ml of boiling water was placed in Rocky Cup.

Is still under development.
Form low-stove, because it is all right as well as lower windshield,
the entire equipment can be lightly.

3729 stove

The only exhaust heat feedback.thefore,highest heat energy without wasting can heating up the center of the pan.Thermal feedback storongly if carring a pot only.
In the idling will automatically weak firepower.

Good Points
1 motion easy refueling.no-valve but high pressure jet.
2 under 2 inches hight.
3 inches wide.
4 jet injection begins from 4 in 15 seconds after the ignition.
5 Pentagon jet are not only very high power, but invite your stove in the from of low.


37mm hight 3729 stove

Add photo
foundation of the each pillar,There are jet holes.

jet position

Edited by JSBJSB on 03/03/2012 07:15:18 MST.

Sean Rhoades
(kingpin)

Locale: WV
jets? on 03/02/2012 16:10:16 MST Print View

Where are the jets located? I don't see them anywhere.

Yukio Yamakawa
(JSBJSB) - F

Locale: Tokyo,JAPAN
Re: jets? on 03/03/2012 06:57:07 MST Print View

Add photo
foundation of the each pillar,There are jet holes.

http://www.youtube.com/watch?v=h2PgG0Mu1h0

Edited by JSBJSB on 03/03/2012 07:16:12 MST.

Mole J
(MoleJ) - F

Locale: UK
BIG flames! on 03/03/2012 13:41:03 MST Print View

Interesting design, but I think you need a wider pan ;)