Forum Index »
Make Your Own Gear »
Just Another Alcohol Stove kit
This is the alcohol stove kit I use. I can't weigh everything, but I think the kit all together is about 5 or 6 ounces.Everything fits neat and tidyThe paperclips are used to weigh the wind-screen down so it doesn't just fly away. I could drop these, but I think it makes the whole thing a lot sturdier and adds only minimal weight.I used two lengths of guitar string (the smallest strings) to make a handle that doesn't get hot and allows me to easily transfer the pot to the cozy.The string handle folds over onto the side of the pot for storage
Edited by jdemonaco on 10/19/2011 18:01:04 MDT.
James,Have a look around for pictures of my cone clone script, as I use a slot & tab joint that would replace the wire closures you've used; no weight, and nothing to lose.There are a few images on BPL threads regarding 'clones'.
You must login to post.
MEMBERSHIP IS REQUIRED TO POST: You must be a Forum, Annual or Lifetime Member to post messages in the backpackinglight.com forums.