|
I sucessfully recoated a Sierra Design clip flashlight (in the family for 22 years) with K-Cote. I took off as much of the peeling coating material as I could, painted it on with a foam brush, let it dry, then shook baby powder on the inside (so it didn't stick to itself. I didn't redo the rainfly which was OK, just the floor/sidewalls. Doing the rain fly would be much more difficult, but if I had to, I'd attach it to the tent upside-down so you could paint it on while it is on a rigid structure.
Edited by ksawchuk on 04/26/2005 09:41:37 MDT.
|