Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
Snow Peak Cozy - Clone
Display Avatars Sort By:
Bill Fornshell
(bfornshell) - MLife

Locale: Southern Texas
Snow Peak Cozy - Clone on 04/20/2005 20:01:42 MDT Print View

This Thread has 'timed-out".

Edited by bfornshell on 03/16/2006 22:09:00 MST.

Adam McFarren
(amcfarre) - F
Snowpeak cozy on 04/21/2005 08:53:20 MDT Print View

I too made a homebrew cozy (for the 600), but out of the reflectix (sp?) material, not neoprene. Weight 0.8oz. It's a very similar design to the AntiGravityGear cozies. Works great, and was easy to make.

Mike Storesund
(mikes) - F
Neoprene cozy on 04/21/2005 16:00:14 MDT Print View

This looks like a good idea. Has anyone figured out how long you have to wait to place the pot into the cozy after removing from the flame?
Will placing directly into the cozy from the stove melt the neoprene?

Joshua Mitchell
(jdmitch) - F

Locale: Kansas
Placing pot directly in Neoprene on 06/30/2005 15:36:39 MDT Print View

As soon as you take your pot off of the flame the outer layer of the pot (assuming you're not using some behemothly thick cast iron monstrousity) will immediately cool to 212 deg F, tops... from what I've read, neoprene should have no problems with that...

want proof? If a jet-boil is boiling, the inner surface of the neoprene cozy they use will be exactly 212 deg F (assuming conditions near sea level, higher altitudes will result in lower temps)... I've never heard of anyone complaining that their jetboil cozy metled.

Bill Fornshell
(bfornshell) - MLife

Locale: Southern Texas
Snow Peak Cozy - Clone on 06/30/2005 16:17:49 MDT Print View

This Thread has 'timed-out".

Edited by bfornshell on 03/16/2006 22:08:18 MST.

Joshua Mitchell
(jdmitch) - F

Locale: Kansas
Lid on 700ml Pot on 07/01/2005 07:13:02 MDT Print View

Bill,
Is that lid the standard lid that it come with, or did you make your own?

Bill Fornshell
(bfornshell) - MLife

Locale: Southern Texas
Modified SP 700 Ti Cup-Lid on 07/01/2005 09:32:23 MDT Print View

This Thread has 'timed-out".

Edited by bfornshell on 03/16/2006 22:07:47 MST.

Paul Luther
(eredluin) - M

Locale: Northeast
SP Pot Cozy on 07/01/2005 17:45:17 MDT Print View

Bill , What about a Cozy for a Fosters can? What do you think?
Thanks,
Paul

Bill Fornshell
(bfornshell) - MLife

Locale: Southern Texas
Fosters Can/Pot Cozy on 07/01/2005 19:04:08 MDT Print View

This Thread has 'timed-out".

Edited by bfornshell on 03/16/2006 22:07:10 MST.