ust thought I would add my measurements and comparison the the original. The first listed weight is the PCS and the second is the ti in ounces:
Pot w/ cozy - 6.8, 4.4
burner unit - 6.0, 3.4
lid - 1.2, .6
stabilizer - 1.0, 1.0
base cup - 0.9, 1.1
It's interesting that the original stove's bottom cup is slightly lighter but everything else is considerably heavier. An earlier poster - in another thread - who had received his Sol ti said he experienced fuel leakage when removing the canister. I attached and then removed the fuel cartridge 6 times with NO leakage at all. This was with a giga power and jetboil, each being attached and removed 3 times. With only two of us reporting on this, it would be nice if others would chime in to determine if this is a design flaw seen on a number of units or just an isolated case.
I will be making a more substantial cozy, as the one provided is inadequate for handling the stove when full of hot boiled water. The handle is just an afterthought and should have been left off. I never used it on the PCS either so I am fine with that. Overall I shaved 6 oz for $20/oz.....a little costly but I also have a smaller packed size and hopefully, better cold weather performance. I should find out soon enough.