Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
Pots and lids
Display Avatars Sort By:
Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
Pots and lids on 03/30/2011 10:16:15 MDT Print View

Not a new topic by any means, but I'm looking for help. I've been using my Snow Peak 600 mug for a pot and a tin can bottom for a lid. The tin bottom fits well but its getting rusty and it's not all that light. I made a new tin bottom and coated it with several layers of black grill paint, but it is still rusting.

I know some people use foil for a lid but I like something more ridged. I keep all my cooking gear in the mug and secure the lid with a rubber band.

What, other than foil, are people using for lids? There used to be folks out there making Ti lids for SP 600 mugs. Is anyone still doing this? I'd love to have one.

J Thomas Peterson
(tpeterson1959) - MLife

Locale: Southwest
Aluminium Flashing Lid on 03/30/2011 11:54:07 MDT Print View

I cut a lid out of the same aluminium flashing I used to make a wind screen. Not quite as light as titanium, but light, durable and cheap.

How about a piece of cardboard wrapped in foil?

Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
aluminium flashing on 03/30/2011 13:02:10 MDT Print View

I make my wind screens from flashing too. I thought about cutting a circle for a lid. Is that what you did or did you make tabs to bend down the sides?

Does anyone know where I can get one of those pressed fitted lids that were going around for a while?

I tried to make something like this picture but it didn't work. Mostly because I am not handy. There was a small strip with tabs that would fold over through holes in the top part of teh lid. I was trying to make a lid that would sit down in the mug a little.


Brian Ahlers
(bahlers7) - F

Locale: Idaho
Re: aluminium flashing on 03/30/2011 13:20:45 MDT Print View

hey Daniel, I use a SP 600 too and what I did for a lid was use a piece of aluminum that you buy to extend your vent tube for your dryer. I traced the top of my SP 600 onto the aluminum and cut it out and left tabs to bend over. Then i cut down a wine bottle cork and screwed it to the center. You can see this in my video that I just posted here in the Make Your Own Gear area. It's called "video of my cook kit".

Philip Delvoie
(PhilipD) - MLife

Locale: Ontario, Canada
SP600 lid on 03/30/2011 13:29:35 MDT Print View


Minibull designs makes a lid for the SP600. Perhaps an option if you are looking to buy something rather than make it yourself.

Ben Wortman
(bwortman) - M

Locale: Nebraska
sippy lid on 03/30/2011 13:40:17 MDT Print View

I found the lid from a plastic tub of anderson erickson french onion dip is a great fit it actually "snaps" on to the SP600. I also cut a small hole on the edge, so It can be used as a sipper lid for coffe/hot chocolate. I don't know if anderson erickson is sold in many places (Nebraska and Iowa for sure).

PM me if you are interested in pictures or would like me to pick one up and ship it to you.

Ben 2 World
(ben2world) - MLife

Locale: So Cal
Re: SP600 lid on 03/30/2011 13:40:17 MDT Print View

I made my own by using one of those can openers that cuts sideways instead of into the can top. I don't remember the exact can I used, but there are MANY cans that fit the SP600 perfectly. But given the cost of the "essentially one use" can opener, the trouble of finding a good "knob" for the lid top.... I would go with Philip's suggestion above and just buy one from Tinny at Minibull.

Ben Wortman - do you boil water with your SP600? Interested in knowing if you do and how well the plastic lid works?

Below are my SP 700 and 600 with home-made lid. Subjective, but I like how my 600 lid covers over the mug -- in contrast with the 700 lid which settles "into" the mug.

Edited by ben2world on 03/30/2011 13:50:09 MDT.

Roger Caffin
(rcaffin) - BPL Staff - MLife

Locale: Wollemi & Kosciusko NPs, Europe
Re: Re: SP600 lid on 03/30/2011 16:19:40 MDT Print View

> I like how my 600 lid covers over the mug -- in contrast with the 700 lid which settles
> "into" the mug.

The problem I have seen with a lid which goes 'over' the pot is that condensed steam can drip down the outside while you are handling the pot. When the lid is inside the pot this doesn't happen.

But how significant this is in practice ... I am not sure.


Dale South
(dsouth) - M

Locale: Southeast
Re: Re: SP600 lid on 03/30/2011 16:52:48 MDT Print View

The lid from a one pound plastic Folgers coffee container fits perfectly. It snaps on and withstands the heat if only boiling water.

Donald Kevilus
(fourdogstove) - F

Locale: Woodlands
Re: Pots and lids on 03/30/2011 17:03:10 MDT Print View

I make them from titanium for the SP450,SP600,SP700,SP900,SP1400
and SP bowelSP600 and friends titanium lids

The SP700,SP900,SP1400 & Bowel are slightly domed for strength.
PM for more info.


Edited by fourdogstove on 03/30/2011 17:05:17 MDT.

Bob Gross
(--B.G.--) - F

Locale: Silicon Valley
Re: Re: Pots and lids on 03/30/2011 17:05:44 MDT Print View


I dearly hate it when my bowel gets domed.


Ken T.
(kthompson) - MLife

Locale: All up in there
Re: Re: Re: Pots and lids on 03/30/2011 19:02:44 MDT Print View


He spells it wrong all the time.

Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
Ti Lid on 03/30/2011 20:46:53 MDT Print View

Donald yes! you are the outfit I was trying to remember. Someone pointed me in your direction a long time ago but I lost too many brain cells since then. I'll PM you.

I saw Ti Goat had some carbon fiber ones but doesn't carbon fiber burn? Plus, isn't that stuff resin based?

Ben 2 World
(ben2world) - MLife

Locale: So Cal
Re: Re: Re: SP600 lid on 03/30/2011 22:06:19 MDT Print View

@ Roger "But how significant this is in practice ... I am not sure."

Happy to report no perceptible downsides in the field.

Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
LIDZ on 03/31/2011 08:02:41 MDT Print View

Another reason I'm kinda particular about lids is that I often just stick my pot in a camp fire. Unless it's raining, I always have a camp fire so I just stick my pot in the coals. If the lid is loose, or flamible it may not do well in a fire pit.

Ben Wortman
(bwortman) - M

Locale: Nebraska
Plactic Lid melting on 04/04/2011 14:09:54 MDT Print View

@ Ben T
I use a canister stove, and the lid survives the boiling. I tried one with a cat can stove once and sice the flames ride up the side, the plastic lid melted.

Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
sipper lid on 04/04/2011 14:38:18 MDT Print View

Thanks for the tip on the plastic lid and the offer to send one. I bet I can find one locally. I'd like to see how well it works as a sipper for coffee. I like to brew coffee cowboy style in my SP600 but I have no tolerance for hot stuff on my lips. I usually pack an extra foam cup but if the lid works it sounds like a better idea. .... darn I'll have to eat some chips and dip, that'll suck :)

EDIT: I know about the silicon bracelet trick but haven't tried it yet.

I procured some lids from Don and I am looking forward to them. I guess since I've been using my SP600 and 900 for better than 3 years it's time for proper lids.

Edited by magillagorilla on 04/04/2011 14:42:07 MDT.

Daniel Fosse
(magillagorilla) - F

Locale: Southwest Ohio
lidz on 04/08/2011 08:12:34 MDT Print View

I got my lids. Thanks for the quick turn-around. They are nice. The SP 600 lid is about 13g with the knob removed. This is a hair lighter than my tin lid. The steel screw for the knob weighs abot as much as the knob though. I was thinking about replacing it with an aluminium screw. This is just conjecture and does not reflect on the quality of the lid.

The lid fits, won't rust and it's very sturdy. Perfect!

I know it didn't end up being MYOG more like MGFSEASITT "make gear for someone else and sell it to them" :)

Works for me.

Thadd Howell
(oldhorse77) - F
Re: Pots and lids on 04/21/2011 13:12:59 MDT Print View

Dan,I work construction and have found the aluminun they use to insulate Steam Piping VERY useful.It has aq lining you have to peel off but it great stuff for UL gear.

Michael Ray
(topshot) - MLife

Locale: Midwest
Re: SP600 lid on 04/21/2011 18:39:56 MDT Print View

Jason Klass does aluminum ones like you want for 600, 700 & 900