steripen gatorade bottle cap thread
Display Avatars Sort By:
Joseph Ainsworth
(jainsworth123) - F

Locale: Greater LA area
steripen gatorade bottle cap thread on 03/25/2011 11:24:39 MDT Print View

I know I read a thread on here at one point about someone making a adapter out of a gatorade bottle cap for the steripen adventurer and since the search function is useless on this site I can't find it.
Does anyone have it one hand?

todd harper
(funnymoney) - MLife

Locale: Sunshine State
Re: steripen gatorade bottle cap thread on 03/25/2011 11:58:31 MDT Print View

Is this it?

http://www.backpackinglight.com/cgi-bin/backpackinglight/forums/thread_display.html?forum_thread_id=13592&skip_to_post=123840

Ben 2 World
(ben2world) - MLife

Locale: So Cal
Re: steripen gatorade bottle cap thread on 03/25/2011 12:19:07 MDT Print View

Todd -- Thanks for the link.

Joseph - I too am intrigued and I just emailed the photo (see below) to Steripen and asked for their opinion as to effectiveness. I'll post their response once I receive itl

KEN LARSON
(KENLARSON) - MLife

Locale: Western Michigan
Gatorade Cap Modification for SteriPen on 03/26/2011 12:56:48 MDT Print View

Joe.....The pictures are true to "form" and can be used as a template. I cut and shaped the hole with a Dremel Tool and used Gorilla Tape for a gasket to make a water seal with the SteriPen. Have had no issues with the set up.

You also may want to refer to the following:
http://www.backpackinglight.com/cgi-bin/backpackinglight/forums/mb_post_form.html?po=reply&note_id=148889&forum_thread_id=19105

Gatorade Cap Modification#1

Gatorade Cap Modification#A

Gatorade Cap Modification#B