Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
Evernew non-stick pots, experiences?
Display Avatars Sort By:
Claudio Zanoni
Evernew non-stick pots, experiences? on 03/07/2011 02:06:07 MST Print View

Hi there,

I am currently using a MSR alpine classic 1.5&2l pot, stainless steel, full weight (incl. handler) 602g

what I am looking for:
- reduce weight & bulk...
- still be able to prepare decent, fresh food (incl. frying)

I am looking at the everynew 1.3l/0.9l pot with frying lid, non-stick or without...

Can you fry steaks and fish on these ti-pots with non-stick coating? What size do you recommend? 1-2 person cooking....


Jack H.
(Found) - F

Locale: Sacramento, CA
Re: Evernew non-stick pots, experiences? on 03/07/2011 02:19:50 MST Print View

I used to have an Evernew nonstick pot. But then I realized that I ate three quarters of the coating. Kid you not. I "self sumped" my dish water for a few months, in effect assuring that everything that left the pot was eaten. The coating that was slowly wearing off. I ate the coating. REI was nice enough to let me exchange my pot for an uncoated one. Neither are good for pan frying.

Save your health. Don't buy non stick.

Dan Durston
(dandydan) - F

Non-Stick on 03/07/2011 03:50:27 MST Print View

I've got the non-stick Evernew 1.3 and I wouldn't recommend frying with it. It might be possible, but it's not going to fry well. Stuff still sticks pretty easily. On hind site I would have gone with the lighter non-non-stick pot since I very rarely fry after one or two initial bad experiences.

Chris W
(simplespirit) - MLife

Locale: .
Re: Evernew non-stick pots, experiences? on 03/07/2011 04:26:25 MST Print View

Titanium sucks for frying, coated or not. Stay with non-stick aluminum if you want to fry something.

Edited by simplespirit on 03/07/2011 04:26:38 MST.

Will Webster
Re: Non-Stick on 03/07/2011 07:00:32 MST Print View

I've been using the 0.9L Evernew non-stick, but mostly just to boil water for FBC. On a recent outing I "cooked" dinner in the pot and despite vigorous stirring around the edges managed to scorch some food to the pot in the middle. Haven't noticed any loss of the ceramic coating. In the frontcountry I'm a firm believer in heavy cookware, and if I wanted to saute in the backcountry I think I'd carry a fairly substantial Al pan and deal with the weight.

William Brown
(MatthewBrown) - F

Locale: Blue Ridge Mtns
Primus on 03/07/2011 07:28:12 MST Print View

I take my Primus pots/pans when I want to go gourmet(frying/making dishes from scratch). ETA multifuel for my family of 5 or ETA express for my son and myself. They have a good non stick surface. Eggs, bacon, veggies, and fish are quick to cook and easy to clean in the pan tops of both models. But you will incur a weight penalty for the luxury.

When I solo I take Ti to basically boil water for rehydrating and hot chocolate.

Renais A
MSR Duralite on 03/07/2011 07:32:25 MST Print View

I've used a selection of both Ti non-stick and anodized Al pots and pans for frying. The MSR Duralite anodized Al pans are not very much heavier than similar Ti pans, but the duralite pans are far better for frying. I've used them now for months straight on extended trips, cooking for three people, multiple meals per day car camping and backpacking, and have yet to see any deterioration to the surface. I can cook things like hash brown potatoes or chicken stir frys and easily wipe the surface clean at the end. Real bacon cooks with ease, and I can fry other foods in the fat produced. With Ti pans, even with pretty careful control of the heat from a canister stove, I fairly frequently find that I missed stirring something and a hot spot developed which caused some sticking. Even with a fairly high flame that I use for stir frying, I have not had issues with hot spots developing on the duralite pans.

John Castro-Rappl
(Jabber) - MLife
Coating on 03/07/2011 10:04:32 MST Print View

As compared to the non-stick pots the uncoated ones are:

1. Lighter.

2. Cheaper.

3. Less likely to kill you.

If you're ever planning to move to freezer bag meals (i.e., using your pot only to heat water) there's absolutely no benefit to having a non-stick coating.

Jacob D
(JacobD) - F

Locale: North Bay
Aluminum on 03/07/2011 10:58:48 MST Print View

I'm in the aluminum non-stick crowd. Al distributes the heat noticeably better than Ti and so far the non-stick coating has held up well; to be fair though I haven't kept track of how many meals have been prepared on it.

I can't recall the brand of pan I have, it's the perfect size though for the small flour tortillas... awesome for scrambling eggs, steaming the tortillas and having some tasty breakfast burritos! I've also made Sarah's Pizza Pan Biscuits on it... this type of stuff is next to impossible with Ti (unless you're ok with having a mix of partially-cooked and burned food) :)

Luxury item for me, most of the time I enjoy cooking.

Rick Dreher
(halfturbo) - MLife

Locale: Northernish California
Re: Evernew non-stick pots, experiences? on 03/07/2011 13:41:36 MST Print View

Hi Claudio,

I use uncoated Ti pans and like everybody says, they're tough to cook on because titanium conducts heat about an order of magnitude worse than aluminum. And let me add, stainless ain't much better!

Frying is a challenge and to that challenge my weapon is oil. Heat pan (takes seconds, add oil and add food before the oil heats up. Fry at will with no burning or sticking. I carry a lot of oil and use quite a bit--a very thin coating isn't enough.

The other Ti challenge is simmering, which requires constant stirring to prevent burning. I don't know of a workaround.

I do own coated aluminum pans that work great but prefer to carry Ti, which is somewhat lighter and far stronger.



Tim Zen
(asdzxc57) - F

Locale: MI
Re: Re: Evernew non-stick pots, experiences? You asked... on 03/08/2011 19:35:10 MST Print View

Add oil, wait for it to get hot (start smoking) crack egg.

Egg in TI pan

Clean up?What is left...

(No live animals were harmed while performing these tests)

Jacob D
(JacobD) - F

Locale: North Bay
Re: Re: Re: Evernew non-stick pots, experiences? You asked... on 03/08/2011 20:08:47 MST Print View

"(start smoking) crack"

...taken from the pages of Charlie Sheen's hiking log


Christopher Taggart

Locale: Western PA
1 egg wonder on 03/09/2011 00:25:02 MST Print View

What about carrying the one egg wonder skillet by T-Fal? If you're hard up to fry then take something purpose built.