What is the cheapest raft that can handle Class II rapids? Alpacka rafts seem great, but $820 is pretty steep.

I contacted Flyweight Deisgns and their raft can only handle Class I.

NRS makes a packraft that costs $550 I don't know how it does in whitewater (no spray deck). I also wish there was a cheaper raft out there - even if it weighted a bit more.

You can take anything you want in class II as long as you are prepared to swim.

Not looking to swim. Just curious if there were a cheaper alternative to alpacka that could handle Class II.

Rob thanks for posting this question. We (FlyWeight Designs) get this question all of the time. For clarity, our boat was designed to be a calm water boat to be used primarily for calm water crossings and hi-lake fishing. Currently, as far as I am aware there are only 4 manufacturers of packrafts in the market, listed below -

Alpacka
Feathercraft
NRS
FlyWeight Designs

You may think that I left Sevylor out, however, they discontinued the Trail Boat last fall so it is no longer being manufactured.

What I am able to divulge at this time is that we are working on some new boat/product designs. We feel that one of the products that we are developing could morph into a whitewater (class II and III) capable boat, however, until I get the prototype finished it is still on the drawing board. Price will be determined once we have finished the process. Our focus will be to keep production costs down and pass those savings onto the consumer as has been our philoshophy thus far.

I welcome the opportunity for people to provide us with feedback and suggestions as we move forward. I look forward to recieving the email that we get from customers and those interested in our products.

Thanks Marc. I hope my post did not come across as degrading to Flyweight, it was not intended as such, as I am sure the raft performs it's intended function flawlessly. I was just looking for a raft designed to handle such situations, rather than hope something designed for calm water would suffice.

I look forward to seeing new designs from Flyweight, as I cannot see myself spending north of $750 on a raft anytime soon. I am sure Alpacka rafts are fine rafts, and deserve the praise, I just do not have that kind of coin.

I think the more relevant question is: can you as a paddler take a Flyweight Designs raft down class II? If you're confident in your ability to not slice up the boat hitting rocks you'd probably do just fine.

A decent option, if you aren't super tall, would be the new Alpacka Scout. 490 bucks, and likely to be drier with the new stern.

@Rob

I didn't think that you were degrading the product...I just wanted to expand on your comments.

Like you, I think that there are a lot of people that want a whitewater capable boat, but either cannot afford one or are unwilling to pay the prices for what is currently available. Hopefully, we can build a high quality product that meets the need.

I can tell you that I have found some great fabrics that aren't widely available that we can hopefully design a boat around. I am really excited about the prospects with these fabrics and they should yield a very durable, highly abrasion resistant finished product.

If someone can design a whitewater capable packraft in the 5 pound range thats more affordable than the current offerings that would be great. On the other hand I'm sure there are some very good reason why these rafts aren't cheap, there's labor, materials etc, you get what you pay for.
My idea is would it be possible to make a whitewater capable raft out of rugged but cheaper/heavier materials and save money there? Even if it was twice as heavy that would still be reasonable to tote around if there were signiicant cost savings.

Edited by Cameron on 03/03/2011 14:19:27 MST.

I think you can still accomplish the goal with high quality materials and a high quality product. I don't think that it is necessary to use heavier materials.

Are there hurdles to get over? Sure. We ultimately may not prevail. If we are able to develop a quality product at a more affordable price, I think there is only an upside for the market.

Maybe it would spur the other market players to reduce prices? Maybe it would spur more innovation? Competition, I think, is a good thing.

What is the right price? I like to hear what the right price point is.

Right now there are basically two options with packrafts
1. A really expensive and heavier packraft by Alpacka or one of the other companies that can be outfitted for really technical whitewater.
2. The flyweight which is reasonably priced, and lighter but isn't designed for whitewater.
An Alpacka is more than a lot of us need. I don't have the whitewater skills to do more than class 2 or 3 right now. On the other hand a flyweight apparently isn't designed for class 2 or 3 and I would worry about shredding it. I would love a flyweight that was able to navigate minor rapids and REALLY tough (even if that doubled or trippled the weight). If it was still priced similar to the current flyweights I think that would create a fanastic choice for mortals like we who couldn't use the whitewater capablities of an alpacka anyway.

"What is the right price? I like to hear what the right price point is."

It will be different for everyone, but the price of your current offering is at my upper limit. I realize if you developed a whitewater capable raft it would probably cost more, so I will have to cross that bridge when it is released. The number of times I would be able to use such a raft is really the reason I would be hesitant to spend much more than 300.

I have access to several areas that are in the Class I-III range with lots of trails. I would love to be able to take the packraft 15-20 miles up river, then hike back. Those are the kind of trips I am planning.

Edited by HikeUltralight on 03/03/2011 18:34:56 MST.

it seems there may be an opinion or two that the Alpacka rafts are excessively costly. this might not be the case, if you consider that given it's 800 something dollar cost, one can reap a very nice recovery on the resale after a few years.

buy the raft and use it 10 times in the year. use it the next year too. sell it for -400 bucks. you are thence out $20 a float. that's chump change.

and Alpacka Scout's are only 500.
in the middle of a large cold river ... alone ... 500 becomes a figure of profound insignificance.
sort of...
because you're glad you spent it.
--
now, Scout's at 500 going in and a 300 recovery split 20 ways, it comes out to 10 bucks a float, which depending which side of the peter v fence you fall .. makes you twice the chump, or maybe just half. i'm not that sure*. (but somehow .. i, i .. gotta have Doug's help on this one.) for now we're calling it one of those murky areas of upper math.

* - unless you're a marxist. marx is dead .. i can cap on them when they're dead, right ? at any rate. marxist = chump x 2.

v.

I do not necessarily think they are excessive. I honestly do not know the mark up. They are, however, out of my price range. Saving up 820 for a raft leaves me out of luck for several other gear purchases for the year. I would only get out 3-4 times a year though, so quite a few less trips than you.

What is the cheapest raft that can handle Class II rapids?

An inner tube --> the redneck packraft originale


What is it that makes a raft capable of handling class II+? I was a whitewater guide for several years on various rivers and can offer a few hypotheses and ideas, all of which are open to debate:

- A durable hull (both against pressure, UV, and abrasion)
- multiple chambers
- maneuverability
- self-bailing or skirted so as not to take on water

I have a flyweight designs raft and have thought about making a skirt that has a durable (ballistic, 1000d, hypalon, etc.) perimeter to protect it from abrasion, which could theoretically allow it to be used in some light whitewater. However, much of the feasibility depends on the nature of the stream and it's geology. Ironically, some streams with few rocks that have some class II-III wave trains might be more appropriate for a wee raft than a shallow lake with sharp rocks.

@ Marc Shea, The old Sherpa Raft design would likely be relatively inexpensive and was exactly the boat these posters are looking for. Not a white-water boat (no spray deck) but 10 inch tubes in a donut construction, meaning a top and a bottom, like the Feathercraft. It was symmetric and had an upturned bow and stern. The tubes can be no smaller than 10 inches and the boater needs a good, stiff paddle to backpaddle.

Throughout the 1980 and 90s many, many Alaskans paddled Class II in vinyl pool toys they bought at the equivalent of K-Mart. They were cheap, lasted one or two trips and were a chore to deflate with their tiny valves. I knew guys who walked the length of the Alaska Raneg in 1996 and they deflated theirs by stabbing them with knives! Then they'd put a piece of duct tape on the hole next time they needed them. Bummer is you can't tie the pack in well, but not too important in Class II. The Sevylor Trail boat was the worst as it was far too small with a little 5" bow tube -- it was a freakin wave shovel!

Believe it or not, in Class II it's not the boat it's the paddle that makes the difference -- that and the paddler! The paddler's got to backpaddle and ferry to keep water out of the boat and put them where they need to be and a vinyl raft and a good paddle is fien for that.

We used to have these same conversations in the 1980s about Sherpa packarafts that cost $500, a lot of money for 20-somethings like us who worked less than we adventured. We paddled the vidnyl boats and trashed them on single trips and so went ahead and as Vacco suggests invested in the real thing.

An Alpacka Scout or an NRS at $500 is the Class II ticket right now -- but that's a lot if you never tried packrafting before, so go to Wallmart or wherever and get a vinyl boat and try out packrafting with a rented sea or whitewater kayak paddle (one piece carried in your hand).

And buy my book!

Edited by romandial on 03/05/2011 22:58:18 MST.

Since you ask....

I am new to pack rafting but after watching some youtube and blog clips, I am hooked.

So I will be in the market for a new pack raft this summer. My price point would be a quality product for $350-450. And maybe a scaled down version from $250-300.

Yeah I might be able to justify a more expensive raft on a per trip basis on the assumption I would be able to sell it after...but if I really like pack rafting, I wont want to sell it and coming up with $800-1000 initially is a tuff pill to swallow.

A good 4-7 pound raft capable of class II-III that packs compact and capable of storing a medium size pack for $400 would be my preference.

@Roman Dial, I have been doing some research and it appears that the Sherpa, Eddie Bauer, and American Safety Products boats all share a common lineage. American Safety Products purchased a life raft company in 1973 (Patten) and it appears that they commercialized a life raft or two-man military boat in the mid to late 70's. FWIW my research points to American Safety Products as the first (possibly only) company to actually trademark the term "Pack Raft." It seems like the use of the term predates American Safety, but they seem to be the ones to commercialize the idea.

It appears that these companies also built their boats out of Neoprene coated nylon which was a standard of life raft manufacturers. It probably explains the common yellow and black color schemes on a lot of these boats.

From what I know, the Sherpa and these other boats were quite wide. The American Safety Products boat was designed for two people and I believe that the interior dimensions were 62" long and 26" wide. Do you happen to recall what the Sherpa dimensions were?

Anyway, with the information that I have, I think that we can build something that will target a lower price point. I cannot give a time frame, but we will begin the process.

@ Marc.

I'll blow the Sherpa up and check.

There is a couple I have been getting emails from who really liked their American Safety boat as it fit them both.

The interior of the Sherpa was 52" or whatever the Alpacka Llama is -- I gave Alpacka that dimension for the Llama back in 2000.

It was wider than the Llama on the inside.

People can save money and weight by not getting a spray deck. If all you do is Class II and the occasional Class III, then no spray deck is needed. If you are doing Class III get a spray deck and by the time you do Class IV you'll want thigh straps too.

Hi Lucas,
If you want to buy an Alpacka raft, I'll sell you mine for $750, sprayskirt and all. It's barely used. You won't regret it; in fact, you'll probably change your whole attitude about hiking and paddling. Let me know a way to contact you, if you're interested.
watergrl