Here we go.
Fresh from the Society, prototype style. I'm limiting these to 6 pairs total for the first run. Here's a chance to own one of the first items made with the waterproof-breathable cuben. I've done very limited testing, so there's no performance warranty expressed or implied for the fabric. No refunds, but I will exchange if the sizing doesn't work out or if there's any build flaw.
CTB1B3-1.0 for the entire back, 3-layer eVent for the palms. Don't ask me to sell you any fabric, because I can't. I have very limited amounts of each. I'll offer these up in 3 sizes, S/M/L.
The cuben has a green tinge, but it's barely noticeable in this version of the fabric, supposedly Cubic is working on the coloring issue.
Anecdotally the breathability seems very good. I wore one mitt around the shop for half an hour while working today, and on the other hand, the original mock up I made out of silnylon. The sil hand was hot and soakey, the other was fine. Seems to be the same as the full eVent mitts I have, but YMMV.
Size small weighed 16g per pair before seam sealing with SeamGrip. I imagine the larges will weigh in around 20-22g per pair.
French seamed for durability.
Price: $65 shipped. I'll seam-grip them for you, but no guarantees on the beauty factor of the job. If you prefer to do it yourself, just let me know.