Cheers! ;)

That pack frame looks interesting. Whatever happened to the TiGoat packraft?

The frame *is* interesting. It hugs my body like the ULA Ohm does, snugly, and softly, but the difference is obvious.


It's very rigid, but extremely flexible. To say this thing is awesome would be the understatement of the (new) year.



As to the Packraft well, I'm sure Josh will chime in, but as we all know, some things don't always quite pan out, but I've got no inside scoop in that regard. I'm thrilled at the Goat Pack.

I know there are some other exciting things otw from TiGoat also, but I'm most excited about the fact that we've got a shop with the capability to do interesting things with Carbon Fiber that we haven't previously had access to.


Am I the only one impressed with the CF Foster's lid?


Maybe the SP700 users would be excited if there was a CF lid for their pot? Hmm?

When can i get one of those cf lids? I need one.

Oh my.

Any idea about what other pots they'll be making the lid for? I'd like one for the MLD 450ml(IIRC) pot/mug thing I'm thinking about ordering. Wait, what am I talking about? I'm going to get one I'm just waiting to see what else I'm getting with it.

The pack looks nice too.

Edited by veriest1 on 01/03/2011 23:49:05 MST.

Wow, it's beautiful! Also being a cyclist I am very familiar with the 'need' for shiny carbon parts. This lid looks great, I am very excited about it. Do you have weight? I would guess only a couple grams.

Wow, that lid looks awesome...
I'm hooked - the one thing I don't like about my Foster's stove is the fiddly lid.
Any ideas when it will be available???

My job here is only to tease you and get your hopes up, not offer "answers". :P




I'd direct your inquiries to info@titaniumgoat.com


All I can say is that DJ and Josh are incredible people to work with, and will likely try to accommodate anybody that asks for anything nicely enough.


I haven't weighed the lid, I will today, don't have my scales on hand, but it feels as light or lighter than the regular lid. I'm sure it would be fractions as heavy as a Ti Lid. It seems very strong, one of the major advantages I see of having one of us that can do CF work is that he's likely willing to make it thinner than most shops would be, but it's definitely thick enough. The fit is also very snug, in fact I'll probably have to soften it just a little.


Also, I have to say, the workmanship on the pack, sewing wise, etc. is top notch. I'll post some initial review type info after I get a chance to get out with it soon. I'll be using it along with a bunch of other things for a heavy weight(by our standards, obviously) winter luxury trip. As soon as I figure out which shoes to buy. =\

"All I can say is that DJ and Josh are incredible people to work with..."

+1.

"All I can say is that DJ and Josh are incredible people to work with..."

+2--I don't know DJ, but Josh is rather amazing.

One question regarding the carbon fiber lid--will it withstand heat, such as when boiling water? I'm not familiar with the properties of that material.

Can that lid be used as a "sippy lid" to drink from (like a coffee cup top)?

"One question regarding the carbon fiber lid--will it withstand heat, such as when boiling water? I'm not familiar with the properties of that material."

"Can that lid be used as a "sippy lid" to drink from (like a coffee cup top)?"


Great minds think alike? I already asked those questions, and just got answers.


I'll just paste a quote from Josh's response:

"If you got it hot enough, the resin could degrade and be an issue, but that would require an open flame being applied. The epoxy resin cures at about boiling, and it is this cure temperature that determines the working temperature. Most of the beer can linings are epoxy based also, with similar working temps. Another factor is the mold release, we are using mold release that is approved for use on "food machinery". Its silicone based mold release used for lube on food processing machinery."


Seems to answer both questions. Temp shouldn't be an issue, it's been factored in, and they should be food safe.

Time to update my MYOG french press!

All I can say is that DJ and Josh are incredible people to work with..."

Yes, I had a good experience with TiGoat too (I love my TiTri Caldera Cone) however I was disappointed to see the mKettle advertised there....
Franco

I don't like the lid at all. It makes me want to give up being cookless just so I can have that lid.

The lids: The Foster/Heiny lids will be available in the next 2 weeks or so. We are deciding if we are going to have some one else build them for us, or if we are going to keep them in house. Lids should be available for some other pots around the same time. There will be others available in the future

The Raft: We bowed out for several reasons.

mKettle: Franco, tell me more, it doesn't have to be here, but let me know. You are not the first to make a comment, so I feel I've missed something.

"however I was disappointed to see the mKettle advertised there...."

Yeah, I saw that up there aswell. I'm going to guess that Ti Goat doesn't even know about that whole ordeal. Ryan didn't even know about it and he owns this place! :)

Josh
I'll send you a PM and lets keep the kettle out of this.
But since you are here, the lid on my 550 ml pot/mug does not fit any more (or any less) because the pot as you know is thin enough to deform.
So the lid needs to fit a few millimeters (3 smidgen in funny measurement) inside the pot.
I like the pot...
Franco

Edited by Franco on 01/04/2011 16:53:21 MST.

You may be in luck there.

That pack is on my wish list this year.

Customer service +2