A few years ago I set up a Laser (one door version) and occasionally fiddled with it at the local retailer , however I cannot remember if that panel can be closed or not.
There is a review of it on this site but it isn't clear.
Maybe Ray Estrella will spot this thread .
As fro the Tarptent comments, I happen to be familiar with that particular situation and have the fly that triggered the "workman like" opinion.
(note I am using a 1 cent coin for proportion, same size as our 5 cent coin)
As you can see in my photo, there were two problems with that fly. One was a small cut (a triangle about 3 mm long and 2 wide) , there is a blob of seam sealer on that now, the other is the stitching just below that cut.
That "faulty" stitching also happens to be in the replacement fly that the customer has , however he decided to keep the fly in spite of Henry offering to take it back and refund the money.
Right now I have a Moment set up in my bedroom (I am fiddling with it) , this one has no over-stitching at all, however having seam sealed several TT's every so often there is one that has some double stitching or two.
Should that bother you ? I don't know, like Steve it does not bother me, and I mean it didn't as a customer.
BTW , if you are in Melbourne you are welcome to come and inspect the Tarptents, I have most of them.
The local importer retailer for the Laser is in the City , a lane off Little Bourke. I know the owner.