oh, yeah I forgot to mention that in the actual post, it was in the blog. It weighs 2.5oz without the pot support or windscreen. There's still going to be a few minor changes as I play around with the stove next week to work some bugs out.
I need to run to the hardware store and pick up a few items like wire mesh for a pot support and a better grate on the bottom of the burn box. I'll also be getting a small hose for blowing air in the burn box when it starts to smolder and I'm going to play around with the holes on the outer can to see if it helps with the way the stove burns. I also need to play with and find out a good way to keep the fire burning hot and consistent, wood stoves and small fires are a new thing for me. $1 cans make it really cheap to play with the design... Presently I'm $2 into this project + my time, which really doesn't count when tinkering.