Forum Index »
Make Your Own Gear »
Dual Fuel stove
Thanks to Bill F. for posting his dual fuel stove. This is basically a copy of Bill's but uses a MSR Windpro stove as the foundation due to its large efficient burner. Total weight is 8.74 oz. as shown with the three ti tent stakes. Works really well with the MSR canister stove in place but I have yet to test it in wood burning mode. Hope to do a full report on it soon. Thanks again Bill !!Kevin
Edited by kegelhoff on 05/18/2009 20:42:58 MDT.
Looks great Kevin. Well formed, clean cut!!! =)
Nice mod, Kevin. I'd only add some holes around the burner to allow the flame to take more fresh air from below the sheet, just to make sure it burns as clean as possible (to reduce possible CO production).
Jan,Thanks for the insight. I was wondering if I needed more air at the burner. I can easily add a few small holes.Kevin
You must login to post.
MEMBERSHIP IS REQUIRED TO POST: You must be a Forum, Annual or Lifetime Member to post messages in the backpackinglight.com forums.