img src="http://i25.photobucket.com/albums/c70/vickrhines/cutsmade2.jpg" alt="Image hosted by Photobucket.com" height="260" width="200">
Lay out 8x1.5 on flashing, mark fold lines at 2.5 inch intervals. Mark drill holes 1/2 inch form centers between marks and 3/8 inch from side. Cut to the holes. Taper the legs. Fold tabs to one side and crease and fold into triangle(center photo). Drill and rivet the triangle along one leg. Form pan and rivet to the tabs folded to center. Rough pot supports with file or Dremmel.