Subscribe Contribute Advertise Facebook Twitter Instagram Forums Newsletter
RE-SIZING a large Titanium Windscreen
Display Avatars Sort By:
Mike Clelland
(mikeclelland) - MLife

Locale: The Tetons (via Idaho)
RE-SIZING a large Titanium Windscreen on 07/17/2008 08:45:46 MDT Print View

RE-SIZING a large Titanium Windscreen

I took a LARGE sized titanium windscreen, and, using a scissor, cut it into 3 smaller (and quite usable) windscreens. It was easy!

FireLite Titanium Foil Windscreen - LARGE ( 0.9 oz )

here's the BPL LINK:

The wind screen is 9" high x 32" long and has a series of holes along one side.

1. Cut it into two sections, 5" x 32" and 4" x 32"

(the 5" tall section needs the vent holes)

2. Cut the 4" x 32" inch section in half into two equal 4" x 16" pieces

3. Trim the 5" x 32" section down a little (it's too long) by about 4" to 5" x 28"

All done, that's it!

The smaller sizes are perfect for solo mug cooking on an alcohol stove or esbit cubes.

The bigger size will work with an alcohol stove and a 1.5 liter pot.

Edited by mikeclelland on 07/17/2008 08:46:20 MDT.