Go to the sporting goods store and buy some collapsible 12 ounce can cozy's ... as light and thin as you can find.

Then pick up a P38 world war II type mini can opener.

On your way home stop and pick up a six pack of Hieniken cans (they have the distinctive barrel shape).

Go home, get comfortable, and have a Hienie .... while you're enjoying your second Hienie, take the P38 can openner and carefully cut the top out of the first can leaving the rim of the can intact. Rinse out the can with soap and water and dry.

Make sure there are no sharp edges then slip the can into one of the cozy's you bought in step one.

You now have a very sturdy (the barrel shape is very sturdy) 12 ounce insulated coffee mug/cup that weighs less than one ounce. (mine weighs 0.9 ounces).

You can make a second one, but I would suggest that you stop there and save the empties to work on tommorow.

Mark you're on a roll lately! Another useful idea.

Not to hijack your thread, but the 12oz Heine makes a great pot for those need no more than 12oz water at a time.

Todd

Thanks!

I was just thinking that myself ....

Just add a Cozy and you have a pot cozy, an insulated mug, and a cook pot. My cozy weighs in at 0.3 ounces. The Hienie can with the top ring still attached is 0.6 ounces.

But I like leaving the reinforcement ring on the can using the P38 can opener a lot better than side cutting it.

Edited by flash582 on 06/22/2008 20:24:34 MDT.

Now try drinking fresh near-boiling coffee from the highly conductive metal edge ...

If I were to try drinking NEAR-BOILING coffee, the temperature of the metal edge would be of very little concern to me!!

wow Mark. I had been interested in trapper's mug but this is cool idea. Although I am not sure I will be able to find that cozy here. What is cozy made of? neoprene?

another view

They give these cozy's away free at sporting events, cell phone companies, etc. as advertising gimmicks.

It's a cheap grade of neoprene with printing on it.

Edited by flash582 on 06/23/2008 13:13:32 MDT.

I've made pot cozys from Gossamer Gear thinlite (1/8 inch) closed cell foam. They work very well.

Edited by dag4643 on 06/23/2008 13:26:52 MDT.

Somewhere I've seen silicone lips that fit on cans. Can't remember where.

One source for a silicone lip guard that'll fit on a beer can (Foster's, but maybe others also) appears to be Ultralight Outfitters. Scroll to the bottom of the page at the following link for info (2.95 each):

http://www.ultralightoutfitters.com/stove.html

Also, except for Texas Aggies, one source that might be checked for a light foam cozy is at the following link:

http://epos3-phx.sequoiars.com/ePOS/this_category=210&store=108&item_number=404598&form=shared3/gm/detail.html&design=coop3

JRS

Edited by JRScruggs on 06/23/2008 19:02:09 MDT.

I'm thinking that a bead of silnet silicone seam sealer on one spot on the rim will suffice .... or perhaps a bead all the way around.

I don't like my coffee warm, not hot ... so it's not an issue for me.

one other way to solve this puzzle would be to cut off a 20 ounce plastic bottle and stuff it into the cozy .....

I may be wrong but I think that mug wouldnt be any warmer then the liquid in it. The rim may be even slightly cooler since the uninsulated thin metal will loose heat easily to cooler surrounding air.

minibulldesign.com has lip guards for a heiniken keg cans.

I've been using an 8 oz. soft-drink can with a cut-to-size version of the cozy. It fits nicely inside my 24 oz. beer-can pot leaving room for a small stove of choice. Both of my cans are side-cut.

The hot liquid and conductive-metal lip is a bit of an issue. You have to be careful with the temperature of the liquid.

These lip guards are just the braclets like the yellow 'livestrong' bands. Just streach them over the lip of the can. They work very well and stay in place.

I made one of these myself over the weekend. Using a Dremel and cut off and sanding wheel I cut the inside top off and sanded it smooth. I then wrapped it with reflectix house insulation. The whole package weights 0.8 ounces. I poured some hot coffee in the can and burned my lip! I tried to fit a "livestrong" bracelet around the rim and discovered the top of the can is too small so the bracelet will not stay on. I'll have to try and affix some silicone to one-quarter of the rim. Fun and easy project.

For quick overnights I've started using the cheap disposable foam cups you see around the office coffee maker. They are a bit on the fragile side, but if you pack them carefully in your cookpot, they last pretty well.

Can you boil water with those silicone bands on the lip of a mug/can? I just managed to fit one over my FireLite SUL 550 Ti mug, which will be perfect...but getting it on is a real bear, and will be impossible if the mug is already hot. Any idea if it would melt? Tinny's site doesn't address this specifically...

depends on the stove really. how much flame licks up the sides of that pot?

btw, I have one of the bands and wont use it. Its an Avent feeding reminder and fits the lg. Heiny pot well. Want it?

You can cut down the can to the same height as the cozy for a real simple fix .... then only the cozy touches your lip.