BPL Community Profile

Colin Krusor (ckrusor) - BPL Premium Member

My Locale Northwest US
About Me Colin Krusor has not added a biography yet.
CityPortland
StateOregon
CountryUS

You cannot send this user a personal message (PM) because they have not specified a PM email address yet.

All Forum Posts by Colin Krusor

Showing 531 - 540 of 817 | Page: 1 ...45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 ...82
 

Post

Forum » Thread

Buttons
I have a plan to make a down vest using SevenD fabric and I'm considering using buttons rather than a zipper or snaps. Buttons are the most difficult type of closure to manipulate with gloves o...

In Make Your Own Gear » Buttons
October 21, 2:16pm

First Aid
I agree with the others. If you don't have any first aid training (and you might), deciding what to bring in a DIY first aid kit will be time consuming, but it will be worth it. The research re...

In GEAR » Who thinks all the first aid kits out there are crazy heavy?
October 19, 5:18pm

Removing spot-welded handles
I've done this three times on titanium pots and mugs. I used a dremel tool, and tried several different bits. It is very easy to accidentally make a hole by cutting/grinding too fast or by pryi...

In Make Your Own Gear » Removing Spot-welded Handles
October 18, 9:55pm

Pure Spectra fabric available
I discovered today that Thayercraft, a fiberclass supplier, is selling 3.3oz/yard pure Spectra 1000 fabric (roughly equivalent to Dyneema sk65) on their website and on Ebay. That weight seems about...

In Make Your Own Gear » Pure Spectra fabric available
October 12, 10:06pm

Vests
Yuri and Danny, Thanks very much for the tips/offers. I think we're looking for something a little lighter, though (<10oz.), to wear in combination with a MB Down Inner Parka on late fall...

In Gear Swap » WTB: Down vest (men's M or L, or women's S or M)
October 09, 6:08pm

DIY heat exchanger pot
I don't know the details of the evernew nonstick Ti pots. I assume it has a teflon coating. If it does, this is a major handicap to attaching a useful heat exchanger. While some expoxies ar...

In Make Your Own Gear » Al Heat exchanger + Ti Pot
October 09, 2:28am

Insulation explanation
"Insulations with high clo values, like down, are very fast acting. A garment with a high clo value, once on, traps your body heat very quickly. In comparison, insulations with high loft, gene...

In GEAR » Coreloft- clo rating?
October 08, 12:40pm

WTB: Down vest (men's M or L, or women's S or M)
My girlfriend and I are both looking for down vests to carry our shoulder season insulation kits a bit further into the colder months. Montbell, Western Mountaineering, and other brands would be of...

In Gear Swap » WTB: Down vest (men's M or L, or women's S or M)
October 07, 8:37pm

Breathability
There is a good thread about the WPB cuben somewhere...Steve Evans and Javan Dempsey discussed it at length. The breathability specs are poor compared to eVent, and about on par with old fashioned ...

In Make Your Own Gear » Breathable Cuben?
October 04, 10:09pm

Hybrid Cuben vs. DP X-pac
Michael, the hybrid cuben is not far lighter than any of the xpac and xply fabrics Dimension Polyant offers: Hybrid cuben described by OP: 2.9 oz WX07: 3.6 oz (0.5 mil film, dacron diagonal r...

In Make Your Own Gear » Hybrid Cuben Fiber - Nylon Fabric
October 04, 9:42pm

All Reader Reviews by Colin Krusor

Colin Krusor has posted no reviews.