BPL Community Profile
kevin timm (ktimm) - BPL Premium Member
|
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by kevin timm
![]() |
It's not all as it seems In some places in Africa hunting actually preserves the animals. Without that, people just kill them to get them away from their crops. Hunting fees in the US go a log ways to suppporting outdoor p... |
||
![]() |
Liners etc We have a bit of experience with this, making large conical shelters, and heating them , and also adding liners or nests. I have not done any testing with a static BTU source but here are some non ... |
||
![]() |
observations It seems a lightly insulated bivy, would work for pushing the dew point out of the down. It also seems a nest would be a better solution, as it provides more air space / flow. Yes both will weigh a... |
||
![]() |
Borah Gear I tested the large BorahGear bivy with a downmat and 20 degree enlightened quilt and it is fine. |
||
![]() |
Site moving We were moving our site yesterday so some stuff was not functional and some technical details were encountered. It should be fine now, but it's back on the old hosting solution. |
||
![]() |
I know Ours nest inside each other to minimize pack space. Middle sections are larger and stronger, they use telescoping pin locks to connect. |
||
![]() |
Dimensions Dimensions and nesting Put the larger section in the middle as its stronger. For a 6ft tent usually .75 of a strong material is worthy. Shorter tents require less. |
||
![]() |
We have nesting poles But the diameter is probably big for a hex 3. Ours nest from an inch doubt side diameter down |
||
![]() |
And We originally had an interchangeable vent / stove jack due to customer suggestion. We moved on to a dedicated vent and stove jack ( that can close) last fall. The concept, while having some merit w... |
||
![]() |
I did not want to go there But we bought the damper because a customer did not like something specific about it and mentioned it to us, so we took a look. I in fact have never used the damper and have no idea where it even i... |
All Reader Reviews by kevin timm
kevin timm has posted no reviews.

