BPL Community Profile
Tohru Ohnuki (erdferkel) - BPL Premium Member
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by Tohru Ohnuki
 |
Re: Re: Re: Sewing Machine Help "Check for gobs of lint in the tensioner and bobbin areas." Exactly, also make sure the needle is facing the right way and is up all the way in its holder. See the section about cleani... |
||
|
Re: MYOG: Group Pot Stand and Windscreen Erm, maybe i'm missing something obvious, but is this a woodburning stove? If so how does the smoke escape if you use a pot that big? For that matter, if it's just a pot stand to be used wi... |
||
|
Re: Having issues with Gutermann....advice sought It might have to do with the thread twist. I thought it was all standard until I read this: The Thread Exchange "Sewing machines designed for the U.S. assume that thread has a left twist. ... |
||
|
Re: U4 +1 on Fallkniven. I have a U2 and the steel is really hard. I can cut cardboard all day without it getting dull... |
||
|
Re: Knee pain, need suggestions Wouldn't know about orthotics. I had a torn meniscus and my ortho suggested taking glucosamine & chondroitin supplements and spinning on a bike for 1/2 hour with no load everyday. I did thi... |
||
|
Re: Straps I don't carry my big dslr into the wilderness but I would second getting some kind of holster bag. I've seen people with the 'tourist strap' around the neck with the camera in front... |
||
|
Re: bias tape "McMaster Carr, product 87975K54" Wow, that sounds like a great material. Don't know if i want the minimum 75 feet though... |
||
|
Re: Easiest way to bind? You might do better with 3/4 or even 1" grosgrain since in half they're 3/8 to 1/2" minus the fabric thickness. There are binding presser feet that have a guide to fold the binding ta... |
||
|
Fallknivens are really nice I would second that. I have the F1 and WM1, The F1 is swedish air force issue and the WM1 is smaller/lighter with almost as much strength and size. Not cheap, but the steel is really hard and keeps... |
||
|
Re: Recommend a goo knife? I would go for a Mora or something equivalent on the inexpensive side, ragnar has a nice selection: Ragweed Forge All the scandinavian designs are based on real woods use, not marketing to mall... |
All Reader Reviews by Tohru Ohnuki
Tohru Ohnuki has posted no reviews.
