BPL Community Profile

David Gardner (GardnerOutdoorLD) - BPL Premium Member

My Locale Northern California
About Me Long-time backpacker and ultralight fan. Day job as an attorney. Did civil and mechanical engineering before law school. Have a cottage business making super ultralight stoves, cook kits, trekking poles, polycryo tarp/tents and saws
CityPetaluma
StateCalifornia
CountryUSA
My Website URLhttp://www.GOLDGear.co

You cannot send this user a personal message (PM) because they have not specified a PM email address yet.

All Forum Posts by David Gardner

Showing 51 - 60 of 357 | Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ...36
 

Post

Forum » Thread

Boil Test 2014-04-01
Parameters: 400 g of 70* F water 15 ml of Klean Strip denatured alcohol 57.8* F air & surface No wind 29.52 inHg barometric pressure 65% relative humidity 16 oz brushed Al beer can (bott...

In Make Your Own Gear » More Foster's Fun
April 01, 2:05pm

Efficiency Spreadsheet
Thanks Ben. PM on the way.

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 31, 6:40pm

JB Weld (again)
Well, the joint I am trying to seal is about 3/16" from the jets on my stove, but I will try the JB weld again and see how it does. Would it be possible to get a copy of the efficiency spre...

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 31, 12:42pm

Efficiency Spreadsheet
Hey guys, I can't seem to get a hold of Ben's SS. Can I get a copy? Thanks.

In Make Your Own Gear » More Foster's Fun
March 31, 11:05am

Joining Aluminum
Jon and Steofan, thanks for the tips. Will try them.

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 29, 11:12am

JB Weld
Glenn, thanks for the suggestion. Regrettably, I have tried JB weld many times on stoves, as well as Permatex 81422 High-Temp RTV silicone and Resbond 907GF. None of them have stood up to the heat ...

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 28, 5:56pm

Re: Re: Strong Work
Glenn, Yes the center pot support is removable. However, I am trying to solder it to the cans, but not having much luck so far. Tricky. Packability depends on what you're trying to pack i...

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 28, 4:20pm

Re: Re: New Efficiency Calculations?
Sorry, I just amended the post to include the amount of fuel. 11.84 g/15.00 ml

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 28, 3:05pm

New Efficiency Calculations?
OK, here's the latest: The setup as tested Parameters: 500.0 g/ml of 70.0* F water 11.84 g (15.00 ml) fuel Air, fuel & surface = 59.8* F Relative humidity = 90% BAR = 30.15 No...

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 28, 12:28pm

Re: Re: Re: Re: Thermofelt pot lid "hats"
Actually, the parameters in the OP of this thread include polished windscreen. For the present, all my tests are run with the polished windscreen. Combination of the cool factor and my preference f...

In Make Your Own Gear » Welding Blanket Under Alcohol Stove for Winter Conditions
March 26, 5:13pm

All Reader Reviews by David Gardner

David Gardner has posted no reviews.