BPL Community Profile
brendan swihart (brendans) - BPL Forum Member
|
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by brendan swihart
![]() |
windshirts I'd also consider a windshirt one of my favorite layers. I made a hooded one from M90 with a liberty ridge pattern and love it. Cheap, easy project with a final weight under 2.5 oz. I find i... |
||
![]() |
hose length My experience has been that having longer hose above the filter improves flow rate but hose length below the filter does not. When I use a gravity filter I only have a couple inches of tubing belo... |
||
![]() |
"A new pack - I know what I want, but don't know what to get." Between the Gorilla, Ohm, and Prophet, the Gorilla will have the cooler back with some 3D mesh and the eggcrate CCF. I have a Gorilla and a MYOG pack made of Dyneema X and the Gorilla is a bit coo... |
||
![]() |
gorilla straps I'm pretty small (about the same as Tyler) and love the gorilla straps. I find them very comfortable. I think it has to do more with body/shoulder/neck shape than large or skinny or whatever. |
||
![]() |
mesh The 3d mesh does have some stretch and is relatively heavy (not sure the exact weight), but it's awesome for shoulder straps and hipbelts. I've tried using mesh in the 2 oz range for packs... |
||
![]() |
Merino 1 Is the merino 1 any cooler than pure merino? I have some 150 merino and love it but it's a little hot in warm weather. I'm wondering if the Merino/syn blend could be the best of both worl... |
||
![]() |
Re: Bairdarkas yeah he did an Aleut paddle as well. I've taken out a couple times on lakes but nothing too serious. I'd love to build one sometime though and do more with it. |
||
![]() |
Bairdarkas My dad built a bairdaka with Corey a couple years ago. Unbelievably cool boat. I hung out for a couple days that they were working on them (assume you're doing yours at the center for wooden ... |
||
![]() |
Tips on constructing a Sawyer filter and platypus gravity water filtration system. replacing the tubing with some 1/32" wall tubing saves quite a bit of weight and is a lot more flexible than the stock platy tubing. http://www.usplastic.com/catalog/item.aspx?itemid=23093 |
||
![]() |
how much hysol for a tarp? a little off topic, but in the interest of not starting a new thread, if I decide to use Hysol U-09lv rather than tape, how much hysol should I order for an 8x10 tarp? |
All Reader Reviews by brendan swihart
brendan swihart has posted no reviews.

