BPL Community Profile
Colin Krusor (ckrusor) - BPL Premium Member
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by Colin Krusor
Showing 381 - 390 of 817
|
Page: 1
...30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
...82
 |
Temperature recording watch (for off-wrist use) Does anyone know of a watch that has the following features: 1. Records temperature max and min 2. Has altimeter 3. Is (actually) water resistant or waterproof (unlike the Tech4O watches) I... |
||
|
M50 John, thanks for the report. The properties of the new M50 seem comparable to TiGoat's SevenD, but at half the price. |
||
|
Hysol Samuel, I haven't tried a roller. I think you'd never achieve compression pressures as high with a roller as you get with tight C-clamps, though. And keeping the seam under pressure through... |
||
|
Hysol Zack, I think, for many people, bonding with Hysol does result in a somewhat stiff seam, but it doesn't have to. If you want to improve your chances of achieving a very flat and flexible, nearl... |
||
|
Pole When I was young, I successfully caught trout by doing what you suggest: cutting a branch (or finding a fallen one) and tying line to it. Those branches were never an ideal fishing pole in any sens... |
||
|
Tarp "A few thru-hikes"? That's ambitious. If only I were willing to make time for that much hiking... Your bargain tarp is clever and looks like it would offer plenty of shelter on all... |
||
|
Connector for using tarp poles as fishing pole I'm making a Hexamid Twin (pieces and guidance from Joe Valesko), and I'll be using a modified GG LT4 and a 32", 0.420" diameter carbon tube from Josh Leavitt for the poles. I wan... |
||
|
Solar charger You said that you want an off-the-shelf charger, I realize, but it might be prudent to see if you can have someone make one for you. Small photovoltaic cells are now available with better than 20% ... |
||
|
Hexamid I recently bought a hexamid twin, and I am modifying it now. I haven't used it yet. Whether the extra cost is justifiable for you is difficult for others to judge, but disregarding the differen... |
||
|
Pot Tony, do you know if something like the jetboil heat exchanger could be silver-soldered/brazed to a lighter pot? It seems to me that it should be possible to braze or solder a wavy ribbon of alumin... |
All Reader Reviews by Colin Krusor
Colin Krusor has posted no reviews.
