BPL Community Profile
Stuart R (Scunnered) - BPL Premium Member
|
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by Stuart R
![]() |
Re: Problem with Pocket Rocket Jerry - there is a general problem with canisters and two problems with the Pocket Rocket. The canister problem is the tolerance on the valve, specifically the dimension from the rim of the valve (... |
||
![]() |
Re: Thoughts on gear for long-distance hikers But even if you are not planning on doing such a long hike, these ideas might be interesting. Absolutely. There are good reasons why versatile, reliable and comfortable gear is desireable for sh... |
||
![]() |
butane canisters cannot be sent by mail Prohibited goods (http://www.royalmail.com/personal/help-and-support/Tell-me-about-Prohibited-Goods): " Gases that are compressed, liquefied or dissolved under pressure, permanent gases whi... |
||
![]() |
Re: windshield VS heat exchanger!? Tord - pretty much any stove question has an answer here on BPL, if only you could find it. Try this for starters: "Performance Comparison Testing of Lightweight Canister Stoves: Controlled... |
||
![]() |
Re: Re: Piezo-electric lighters don't work at 12,000 feet? > More energy is needed at altitude to light the gas, for techie reasons. Butane lighters have a jet, just like a stove. At altitude the air is much less dense, so the air/fuel ratio is not t... |
||
![]() |
Pot Lid: How To I used a scrap piece of 1/4" aluminium to create a sort of template - it has a curve at the radius to form the lip of the lid. The 1mm aluminium sheet was attached to the template by a ... |
||
![]() |
Pot Lid I have a Coleman Exponent Cookset which consists of two pots but only one lid. This is really annoying as the lid is sized to fit the larger pot but I only ever use the smaller pot. So, I made my o... |
||
![]() |
100% propane in aluminuim canisters? Does exist, altho I have yet to see one in a shop |
||
![]() |
Re: Re: Re: Thermal Feedback in Upright Canister Stoves Hi Roger > The problem with vaporiser tubes is sealing them. At the stove end I drilled a hole thru' the centre of a brass M5 bolt and then brazed the SS vaporiser tube into the hole. ... |
||
![]() |
Re: Thermal Feedback in Upright Canister Stoves Nice article Roger, which pretty much matches my own experience. Here's an early stove I made which suffered from too much heat conduction down the aluminium mixer tube, which damaged the o-rin... |
All Reader Reviews by Stuart R
Showing 1 - 1 of 1
|
Page: 1
![]() |
Coleman Exponent Non-stick Cook Kit At first glance this looks like just another anodised aluminium cook set, but on closer inspection you will find that these pots have a real standout feature. There is a spiral groove machined or stam... |

