BPL Community Profile
Donald Kevilus (fourdogstove) - BPL Forum Member
|
|
|
You cannot send this user a personal message (PM) because they have not specified a PM email address yet.
All Forum Posts by Donald Kevilus
![]() |
Rolls of foam reflective insulation. I have used them with luck for a number of years. I realy like using the PU size 26" x 56"in a hammock and have done that in-0 weather. I find the heavy-duty ones with foam insulation wo... |
||
![]() |
Needs more development ? I think this article is a good start, but lacking in many aspects as bought out in other post. The currant user has a wide selection of some very well designed portable fire rings and crafted wood... |
||
![]() |
Small pot The Ben 1,1 qt Bushpot is made by Open Country. It's basicly there old boiler. Coffee pot with no perc and plan lid in hard anodized. USA made and weighs only 6,8 oz. |
||
![]() |
BKltI 1 oz boil Bob; Used cloths pins because it seems to be the fuel of choice by Zelph. I normaly use 5/16 rd popler wood dowels from here in the US. -Kline dried pine split to average daimter of 5/16".... |
||
![]() |
BKltI 1 oz boil Already made one, took less then 5:30 seconds from spark to boil. 1 oz of chinese cloths pins. You only need 1,250 oz cloths pins in the "Bushbuddy" and "BushcookerltII" to... |
||
![]() |
Re: Pots and lids Dan; I make them from titanium for the SP450,SP600,SP700,SP900,SP1400 and SP bowel The SP700,SP900,SP1400 & Bowel are slightly domed for strength. PM for more info. fourdog www.... |
||
![]() |
Re: starter fluid 15cc of alcohol in a good alcohol stove may bring 16oz to a boil in ideal conditions as well as the BKltI will when the alcohol is burned in the burn cup. But in cold damp conditions it will not.... |
||
![]() |
Re: clarification Brent; I have found that with the method I use for the testing also works very well in my style stove for starting wood found in the field. If the wood is very damp or cold 10-15 cc in the b... |
||
![]() |
Re: Thanks everyone.... Tom if you use a windscreen sized for your pot to you have 3/8 of a gap around your pot it will greatly aid in efficient operation. When using fuels of low btu value (wood, alcohol & esbit)... |
||
![]() |
Boil times "Bushcookerlt I" To clarify the times posted on my website just about two years ago. The standard I used was when bubbles started coming up from the bottom of the pot. I used the stove DX II that I started to prod... |
All Reader Reviews by Donald Kevilus
Donald Kevilus has posted no reviews.

